JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
This product is available at our retail partners. You can also find replacement parts and outlet items in our Outlet and Parts Store.
IceCap Algae Internal Turf Scrubber is a plug-and-play solution to battle algae as a natural water filter to remove nitrate, phosphate, and other pollutants from aquarium water. For In-Sump Use Only - No feed pump or plumbing is required. Available in three sizes.
IceCap PRO Internal Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed—thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes.
Item #: IC-AGS-1INTPRODimensions: 10.8 x 6.15 x 17in (LxWxH)LED Number: 2 x 6wTotal LED Wattage: 12wScreen Size: 8.5 x 6inWater Pump: EVO-1000 (20w)Water Depth: 4-10inMax Flowrate: 250gphTank Rating: Aquariums up to 100gal
Item #: IC-AGS-2INTPRODimensions: 12.5 x 6.15 x 21in (LxWxH)LED Number: 2 x 12wTotal LED Wattage: 24wScreen Size: 11.8 x 7.4inWater Pump: EVO-1000 (20w)Water Depth: 4-10inMax Flowrate: 500gphTank Rating: Aquariums up to 225gal
Item #: IC-AGS-4INTPRODimensions: 16.5 x 6.15 x 21in (LxWxH)LED Number: 2 x 15wTotal LED Wattage: 30wScreen Size: 15.8 x 10.5inWater Pump: EVO-2000 (30w)Water Depth: 4-10inMax Flowrate: 800gphTank Rating: Aquariums up to 350gal
IceCap Internal Algae Scrubbers are designed to be placed directly in the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begin to grow on the screen, it “scrubs” the aquarium water of excess nutrients, resulting in fewer algae growing inside the display tank. Once the screen is covered in algae, it can be “harvested” by removing a sizable portion, thereby removing the contaminants from the system.
Turn off the feed pump. Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all the algae from the screen, as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks.
Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
CoralVue, Inc. and IceCap hereby guarantee this product to be free from defects in material and workmanship for a period of:
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
To submit a warranty claim, please visit our CoralVue Support Portal.
Starting at $264.99
Starting at $531.29