Octo VarioS 10 Float Switch Extension Cable
SKU: ROP-VAR10-FSX
- Genuine OEM Direct Replacement: Authentic factory-spec electronic sensor extension line designed exclusively for the flagship Reef Octopus VarioS-10 controllable pump system.
- Generous 9.8-Foot Run Length: Provides nearly ten feet of additional reach to effortlessly clear complex equipment rooms, tall reservoir stands, and remote multi-sump setups.
- Waterproof Threaded Locking Fittings: Equipped with specialized male-to-female circular connectors featuring rubber internal compression gaskets for a moisture-sealed bond.
- Proactive System Failsafe Protection: Bridges the physical distance to your overflow sensors without modifying, splicing, or compromising your native smart controller's factory warranty.
- Heavy-Gauge Shielded Core: Insulated with an extra-thick, marine-grade protective jacket that actively blocks electromagnetic interference (EMI) from neighboring ballasts.
- Plug-and-Play Quick Link: Snaps instantly inline between the factory VarioS-10 float sensor module and the primary 36V smart controller dock without tools.
Reef Octopus
Globally trusted for premium protein skimmers and pumps, engineered in-house for unmatched reef filtration performance.
Reef Octopus VarioS-10 Pump Controller Float Switch Extension Cable - 9.8 ft (ROP-VAR10-FSX)
The Reef Octopus VarioS-10 Float Switch Extension Cable (SKU: ROP-VAR10-FSX) is an authentic factory-spec electronic accessory distributed by CoralVue to expand the remote monitoring reach and structural layout flexibility of your automated filtration network. The flagship VarioS-10 circulation pump is an industrial-class 36V system typically reserved for massive display aquariums, multi-tank retail arrays, and sophisticated commercial commercial installations. Because these large-scale footprints require deep sumps, dedicated remote equipment rooms, or tall filtration cabinets, the standard 6.7-foot factory float switch wire is frequently too short to safely trace back to the primary pump controller board.
This premium 9.8-foot (3-meter) extension cable easily bridges that distance, allowing you to mount your smart controller at a comfortable eye-level viewing station while placing your critical overflow sensors exactly where they belong. Engineered for the demanding environment of marine sumps, the cable features proprietary threaded male and female connection terminals. When screwed together, internal rubber washers compress tightly to form a completely waterproof barrier. This design keeps corrosive salt air, high humidity, and localized water splashes from penetrating the internal copper pins, ensuring that your high-water failsafe line remains completely functional to protect your facility from accidental flooding.
Key Features
True VarioS-10 Factory Wiring Matching: Sized and pinned specifically to match the unique sensor connection standards native to the high-pressure VarioS-10 controller ecosystem.
Corrosion-Proof Locking Collars: Molded-polymer threaded nuts securely lock the wire junctions together, preventing accidental disconnections caused by heavy cord pulling or pump vibration.
Heavy Shielded Jacket Wall: Commercial-grade insulation provides structural kink resistance and protects the low-voltage signal path from high-power LED ballast or pump motor electrical hum.
(Note: This accessory consists of the 9.8-foot inline electronic extension cable only. Interactive float switch sensors, acrylic mounting brackets, and primary VarioS-10 pumps are sold separately).
Verified Hardware Compatibility
Reef Octopus VarioS Series: Engineered exclusively for the Reef Octopus VarioS-10 Controllable Circulation Pump Controller Float Switch (ROP-VAR10-FS) line.
(Note: Due to specialized pinning matrices and proprietary connection profiles unique to the flagship 36V VarioS-10 line, this extension cable is not backward compatible with smaller low-voltage pump series such as the VarioS 2, 4, 6, or 8 systems).
What’s Included:
(1) Reef Octopus Replacement VarioS-10 Pump Controller Float Switch 9.8 ft. Extension Cable
(Note: Secondary electronic float switches, mounting clamps, wire organizers, and VarioS-10 pump bodies are sold separately).
Technical Specs:
Official Manufacturing Title: VarioS 10 Pump Controller Float Switch Extension Cable, 9.8 ft.
SKU / Factory Part Identifier: ROP-VAR10-FSX
Total Cable Length Profile: 9.8 Feet / 3.0 Meters Continuous Run
Connection Interface Type: Waterproof Threaded Male to Female Round Proprietary Terminal
Primary Function: Remote Extended Positioning for Electronic Failsafe Sensors
- Disconnect the primary power supply brick from your VarioS-10 controller to temporarily deactivate all sensor alarms before plugging in new wires.
- Locate the existing connection point where your VarioS-10 float switch cord hooks directly into the side port of the smart controller block.
- Unscrew the small threaded plastic locking ring counter-clockwise to uncouple the float switch cable from the controller housing.
- Take the male end of your new ROP-VAR10-FSX extension cable, align the internal registration alignment pins with the controller port, and press it in straight.
- Spin the cable's threaded collar clockwise until hand-tight, then take the remaining female end and connect it firmly to your raw float switch cord terminal.
- Route your extended 9.8-foot cable line cleanly through your wire management board, restore system power, and test the float sensor manually to verify it cuts pump power.
Pro Tips:
- Never Force the Multi-Pin Terminal Plugs Together. The proprietary waterproof connectors on this extension cable feature precision-molded internal guide channels that ensure the tiny electrical terminal pins insert dead-straight. When coupling the cables, look down into the barrel to align the small notch line before pressing them together. If the plugs do not slide together easily, do not try to hammer or twist them with heavy force. Forcing a misaligned connection will instantly bend or break the pins, ruining the cable and potentially shorting out your smart controller board.
- Apply a Touch of Dielectric Grease for Total Moisture Protection. Even though these locking collars are built with high factory tolerances to seal out environmental humidity, external sump environments are aggressively corrosive. To guarantee a perfect low-voltage signal transfer over years of operations, add a microscopic smear of dielectric silicone grease directly across the face of the rubber ring before screwing the connection together. This creates an impermeable moisture shield that completely prevents salt creep from weeping into the pin bay.
- Avoid Running Low-Voltage Cables Flush Against Heavy AC Power Lines. While this cable features a thick shielded jacket built to block minor electromagnetic hum, try to avoid bundling it parallel inside the exact same wire channel as heavy 110V AC power cords from old-school heaters or large aquarium chillers. Continuous close-proximity contact with heavy alternating current fields can occasionally cause ghost signal interference on low-voltage lines. Keeping your data or sensor wires separated from heavy power cords prevents erratic behavior or false sensor trip loops.