?unique=9ecd6e9)
Octo SSS Black Nylon Screws (Set of 5)
SKU: ROP-SCRW-SSSB
- Genuine Reef Octopus Hardware: Factory-direct replacement nylon thumb screws engineered to precisely fit your OCTO skimmer baseplate assembly.
- Corrosion-Proof Structural Design: Engineered out of pure, high-grade black nylon to permanently eliminate rust and metal leeching in salt water.
- Tailored for SSS Space-Savers: Thread matched specifically for tightly configured Space Saving Skimmer (SSS) base grids and pump mounts.
- Tool-Free Sump Maintenance: Textured thumbscrew heads provide effortless, slip-free tightening by hand, even inside cramped aquarium stands.
- Essential Multi-Pack Convenience: Packaged in a complete set of 5 to fully refresh your skimmer base or keep vital backup spares on hand.
- Thread-Safe Acrylic Protection: Soft nylon construction yields under excessive torque, safeguarding your high-end skimmer body from cracking.
Reef Octopus
Globally trusted for premium protein skimmers and pumps, engineered in-house for unmatched reef filtration performance.
Reef Octopus Black Nylon Base Screws - Set of 5 (ROP-SCRW-SSSB)
The Reef Octopus Black Nylon Skimmer Base Screws (SKU: ROP-SCRW-SSSB) are direct OEM factory replacement parts meticulously produced to lock down your protein skimmer’s bottom plate assembly. Standard marine hardware is highly susceptible to harsh chemical wear, but these specialized thumbscrews are molded from resilient, premium-grade black nylon. This completely non-corrosive composition ensures that no toxic rust or metal compounds can ever leech into your delicate coral reef ecosystem, safeguarding fragile invertebrates and fish alike.
This specific 5-piece hardware set is optimized exclusively for the Reef Octopus Space Saving Skimmer (SSS) series. Because SSS models position the main water pump directly inside the footprint of the acrylic skimmer body to conserve premium sump space, maintaining a perfectly level, vibrations-dampened foundation is critical. These nylon screws hold the internal assembly tight against the base plate, significantly mitigating motor resonance and micro-vibration noise. Additionally, their engineered material profile is purposefully softer than cast acrylic; if a screw is accidentally overtightened during routine pump maintenance, the nylon threads will strip cleanly before placing catastrophic structural stress on your skimmer's main acrylic housing.
Key Features:
Zero-Metals Marine Safety: 100% aquarium-safe black nylon construction won't degrade, pit, or oxidize when continuously submerged in saltwater.
Vibration Dampening Grip: Firmly anchors the inner pump housing to the bottom plate, minimizing operational hum inside your cabinet.
Hand-Tightening Profile: Knurled head texture offers excellent mechanical advantage for fast, tool-free installation during cleaning cycles.
Perfect OEM Thread Pitch: Machined to drop right into factory-tapped holes without cross-threading or binding.
Complete Base Refresh: Provides a matching set of 5 screws to replace old, salt-crusted, or lost baseplate hardware in one go.
Verified Model Compatibility:
Reef Octopus Classic SSS: Classic 110-S, Classic 150-S, Classic 152-S, Classic 202-S.
Reef Octopus Super Reef Octopus (SRO) SSS: SRO-3000SSS, SRO-5000SSS.
Reef Octopus Regal SSS: Regal 150-S, Regal 200-S, Regal 250-S.
(Note: Designed strictly for Space Saving Skimmer internal pump base configurations).
What’s Included:
(5) Reef Octopus Black Nylon Replacement Thumbscrews
Technical Specs:
Official Product Name: Reef Octopus Black Nylon Screw for Skimmer Base (5-Pack)
SKU / Part Number: ROP-SCRW-SSSB
Material Composition: Heavy-Duty Industrial-Grade Black Nylon
Drive Style: Knurled External Thumb Head / Thread Pattern Spec
Primary Target Series: Reef Octopus SSS (Space Saving Skimmer) In-Sump Models
Manufacturer Distribution Support: CoralVue Authorized Reef Parts
- Turn off all power to your filtration system and carefully remove the protein skimmer from your aquarium sump.
- Empty any residual water out of the skimmer body and place the unit upside down on a clean, soft workspace towel.
- Remove any remaining cracked, swollen, or salt-bound base screws from the undercarriage.
- Align the skimmer's main acrylic chamber holes over the tapped receiving threads located on the lower baseplate rim.
- Insert the new black nylon screws by hand, turning clockwise until the screw head meets the acrylic plate surface.
- Tighten the screws gently using only your fingertips. Stop turning as soon as you feel firm resistance—do not use pliers or tools.
Pro Tips:
- Never Use Metal Tools for Installation. These replacement nylon screws are designed strictly for hand-tightening. Avoid using screwdrivers, pliers, or channel locks to force them down. Because nylon is a yielding material, excessive force from metal tools can instantly strip the threads or shear the thumb head off entirely. Fingertip pressure is more than enough to keep a space-saving skimmer platform rock-solid.
- Clear Away Sump Detritus Before Threading. Over time, fine sand granules, calcium deposits, and organic detritus can settle into the baseplate screw channels. When replacing your hardware, take a brief moment to rinse the empty tapped holes with warm fresh water or white vinegar. Cleaning the internal thread tracks guarantees the new nylon screws glide in smoothly without binding or cross-threading on hidden debris.
- Keep a Spare in Your Maintenance Cabinet. Because SSS skimmers require you to decouple the base plate to access and service the internal pump impeller, these screws are handled frequently during deep cleanings. Their lightweight profile makes them easy to drop or misplace in a dark sump cabinet. Keeping a clean, uncrusted set of factory backup screws on hand ensures your filtration line is never down while waiting for shipping.