?unique=9ecd6e9)
IceCap ATO / Klir Power Adapter
SKU: IP-ATO-PSU
- Cross-Device Hardware Compatibility: Engineered for immediate plug-and-play operation with all generations of IceCap ATO EZ controllers and Klir Di-4/Di-7 automatic fleece filters.
- Regulated 12V DC Fluid Insulation: Delivers a continuous, ultra-stable 12-volt direct current output that safeguards electronic control boards from line ripple or systemic voltage drop.
- Corrosion-Insulated Molded Jacket: Features heavy-gauge copper wiring encased inside a high-flex, moisture-stabilized PVC jacket designed to survive humid aquarium cabinets.
- Standardized 2.1mm Core Fitting: Terminated with a precision-molded 2.1mm x 5.5mm center-positive barrel connector that locks securely into receiving terminal controller jacks.
- Integrated Thermal Safeguards: Built-in internal circuitry automatically limits power delivery or halts operation in the event of downstream short-circuits or utility pump lockups.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
IceCap 12V 1A Replacement Power Supply Adapter
The IceCap 12V 1A Replacement Power Supply Adapter (SKU: IC-ATO-PSU) is an authentic, factory-authorized digital switching power supply produced by IceCap to preserve operational continuity, ensure structural safety, and restore full control performance to automation assets like the IceCap ATO EZ system and Klir Automatic Roller Fleece Filters. Low-voltage aquarium peripherals operating in immediate proximity to open saltwater are highly vulnerable to localized electrical stress. Power supplies tucked beneath tank stands face constant exposure to evaporating moisture, elevated humidity, and accidental salt spray during regular sump cleanings. When a factory power brick burns out or suffers salt-creep shorting, choosing an untested, un-isolated generic multi-plug replacement can introduce electronic line noise, disrupt sensitive internal optical level sensors, or even ruin internal control chipsets.
Engineered to match the strict engineering parameters of specialized aquatic electronic devices, the IC-ATO-PSU delivers a highly regulated 12V DC output up to 1.0 Amp (12 Watts max capacity). This steady power curve ensures your IceCap top-off pump or Klir fleece advancement motor receives clean electricity without high-voltage micro-spikes that can trick optical safety eyes into triggering false-empty alarms. Featuring a standardized 2.1mm x 5.5mm center-positive barrel connector port, this power block plugs seamlessly into your stock electronics hub. Its compact wall-wart profile avoids crowding power strips or aquarium controller boards, leaving ample space for adjacent plugs.
Key Features
Prevents False Sensor Triggers: High-frequency line filtering stops voltage drops that can cause ATO optical eyes or water-level sensors to misread.
Resists Persistent Cabinet Salt Creep: Sealed housing protects internal transformer components from corrosion caused by high-humidity environment exposure under aquarium stands.
Safe, Low-Voltage Energy Curve: Low DC power draw keeps current transfers safe around open water reservoirs, preventing micro-amp stray voltages in your filtration setup.
(Note: This retail SKU contains (1) standalone IceCap 12V 1A AC/DC replacement power adapter with attached 5-foot DC barrel cord. Main electronic controller hubs, float switches, roller filter bodies, and utility water pumps are sold under separate product categories).
(1) IceCap IC-ATO-PSU 12V 1A AC/DC Switching Power Supply Adapter
Technical Specs:
Official Manufacturing Title: IceCap 12V 1A AC/DC Switching Wall Adapter
SKU / Catalog Part Identifier: IC-ATO-PSU
Primary Device Compatibility: IceCap ATO EZ, Klir Di-4 Drop-In, Klir Di-7 Drop-In Filter
Input Voltage Operating Range: 100V - 240V AC / 50-60Hz Universal Standard
Regulated Output Voltage Rating: 12 Volts DC (Direct Current Circuit)
Maximum Output Current Delivery: 1.0 Amp (Accommodates 1000mA loads and under)
Total Power Workload Capacity: 12 Watts Maximum Output Limit
Terminal DC Output Jack Style: 2.1mm ID x 5.5mm OD Barrel Plug (Center-Positive Profile)
Attached DC Lead Wire Length: 5 Feet (1.52 Meters Total Tracking Length)
Primary Shell Housing Material: Impact-Resistant ABS Thermoplastic
Safety Certification Profiles: UL Listed, CE Certified, RoHS Compliant, FCC Approved
WARRANTY
CoralVue, Inc. hereby guarantee this product to be free from defects in material and workmanship for a period of:
- 90days
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse, or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of the owner's or his agent's first knowledge of the defect.
- That CoralVue, Inc. shall be given the first opportunity to make any repairs, replacements, or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary, or consequential damages of any nature, however arising out of the use or inability to use because of the product defect.
Click here to learn more.
- Unplug the failing or damaged power adapter from your AC wall outlet or power strip before adjusting any equipment cords.
- Trace the low-voltage DC line back to your IceCap ATO EZ controller or Klir Filter electronic control box, and pull the barrel plug out of the device jack.
- Inspect the receiving female jack on your controller box. Ensure it is entirely dry and free of salt crust, corrosion, or debris. Clear away any grime with a dry cotton swab.
- Insert the new 2.1mm barrel connector tip of the replacement power adapter firmly into the controller jack until it seats securely.
- Loop the power cord down below the jack level before running it up to your outlet to establish a dedicated drip loop. This stops any water drops from following the cord into your plug.
- Plug the power brick into your 110V power strip. Verify the LED status indicators on your ATO controller or Klir roller light up, then run a brief test cycle.
- Pro Tips:
- Always Establish a Proper Drip Loop on Every Power Supply Cable.
CRITICAL AQUARIUM SAFETY WARNING: When plugging this replacement power adapter into any wall outlet or equipment power strip, always arrange the power cable with a pronounced downward drip loop. A drip loop ensures that if salt water splashes onto the cable, or humidity condenses along the wire track, the water drops will run down to the bottom of the loop and fall safely onto the floor, rather than following the cord straight into your high-voltage electrical socket.
- Mount Your Low-Voltage Power Bricks High Inside Your System Cabinet. To prolong the lifespan of your replacement transformer, never let the power adapter sit flat on the floor of your aquarium stand or beneath plumbing joints. Use industrial hook-and-loop mounting tape or zip-tie brackets to mount the power brick high up on the interior cabinet wall, well away from moisture sumps or active splash zones. Keeping the transformer off the ground shields it from standing water and heat build-up.
- Unplug the Power Source Before Performing Routine Filter Roll Maintenance. Whenever you swap out dirty filter fleece rolls on your Klir unit or clean your ATO pump, always unplug the power adapter from the wall first. Leaving the power supply live while handling these components can cause accidental dry-firing, which strains the advancement gears or pump impellers if they trigger without water coverage. Disconnecting power adds an easy layer of safety during routine service loops.