- VerVve LED - 260mm Suspension Kit
- Made of Stainless Steel Cable for a lifetime of use
Suitable mounting option for Giesemann Futura and VerVve fixtures. Super clean looking installation that lets you easily adjust the height of your VerVve up and down as you please.
- MORE DETAILS
Installation of the VERVVE by wire suspension kit: Attach the two wires on the top of your fixture by screwing the screws into the nuts on the top rail. Check the tightness of the cable holder. Install the ceiling mounting with suitable screws and wall plugs, making sure that the brickwork/ceiling on site can offer sufficient support. If necessary, special fastening systems, such as Hollow wall anchors, screws, etc may be necessary. If uncertain, please consult with a specialist company. Now run the steel cord through the bore of screw. Screw into the ceiling mount Insert the loose end of the steel cable into the top opening of the cable holder hole and push through until the end exits through the side hole. Since your light is equipped with continuously variable height adjustment, it can be raised or lowered easily by applying pressure to the nozzle of the spring lock mechanism. For safety reasons, always support the lamp when it is being adjusted. When the light unit is gently lowered again with the nozzle released the cable will automatically lock in place. Always aim to set your light unit level with the aquarium.
You may also be interested in the following product(s).