Octo Bubble Blaster 2000 Skimmer Pump
SKU: HY-2000S
- Pull more air per gallon for more aggressive, effective skimming.
- Digital control board manages startup, RPM, and shuts off on fault.
- Clear volute housing lets you spot clogs without disassembly.
- Direct fit for protein skimmer models: CLSC-150INT, SRO-2000, and XP-2000, no adapter needed.
Reef Octopus
Globally trusted for premium protein skimmers and pumps, engineered in-house for unmatched reef filtration performance.
Reef Octopus Bubble Blaster HY-2000 Skimmer Pump
Most skimmer pumps on the market are standard water pumps retrofitted with a modified impeller to draw in and chop air. The Bubble Blaster HY-2000 was built from the ground up as a dedicated skimmer pump, engineered around pulling the largest possible volume of air relative to water flow — the key to aggressive, effective protein skimming.
A digital control circuit board manages directional start-up and RPM speed, and shuts the pump down automatically if it detects a fault, protecting the motor from damage. The clear volute housing lets you see inside the pump without taking it apart, so a clog or obstruction is visible at a glance instead of requiring a teardown.
Key Features:
- Purpose-built air-shredding design, not a modified water pump
- Digital control board for directional start-up and RPM management
- Automatic shutoff on fault detection to protect the motor
- Clear volute housing for at-a-glance internal inspection
- Direct fit for CLSC-150INT, SRO-2000 INT/EXT/SSS, and XP-2000 INT/EXT/SSS, no adapter required
- Fits NWB-150 with the optional output adapter
- Max flow: 250 GPH
- Max air draw: 960 L/H (34 SCFH)
- Power consumption: 30 watts
Ideal For:
- Direct replacement pump for Reef Octopus CLSC-150INT, SRO-2000, and XP-2000 skimmers
- NWB-150 owners who need the pump plus the output adapter
- Hobbyists looking to restore or boost skimming performance on this skimmer size
What's Included:
- One Bubble Blaster HY-2000 skimmer pump
- Optional: NWB-150 output adapter (+$21.92) — required for NWB-150 skimmers, requested at time of purchase
Specifications:
- SKU: HY-2000S
- Max Flow: 250 GPH
- Max Air: 960 L/H (34 SCFH)
- Power Consumption: 30 watts
- Dimensions: 205 x 155 x 125mm
- Compatible with (no adapter needed): CLSC-150INT, SRO-2000 INT/EXT/SSS, XP-2000 INT/EXT/SSS
- Compatible with (adapter needed, sold separately): NWB-150
WARRANTY
CoralVue, Inc. and Reef Octopus hereby guarantee this product to be free from defects in material and workmanship for a period of:
- Five (5) year warranty on pump body/housing
- Three (3) year warranty on Reef Octopus-branded controller
- One (1) year warranty on Power Supply, Impeller (and components), Rotor, Rear Bushing, and Gaskets
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.