?unique=9ecd6e9)
IceCap Inline UV Sterilizer Vessel Cover (Male Fitting)
SKU: IP-UV-VC
- 100% Genuine OEM Factory Part: Distributed directly by CoralVue as an exact structural thread pattern and inner diameter match for quick tool-free maintenance.
- Male Threaded Interface Pattern: Specifically machined with rugged male-profile exterior tracking threads to engage tightly with corresponding housing lock rings.
- Multi-Wattage System Synchronization: Handles the upper housing connection configurations for designated internal and external high-output inline systems.
- Heavy-Wall High-Impact Composite: Injection-molded from specialized engineering polymers that entirely resist cross-threading, UV radiation bleaching, and salt creep.
- Essential Compression Foundation: Serves as the primary mechanical base needed to evenly compress internal blue gaskets and flat seals for an airtight system loop.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
IceCap High-Output UV Sterilizer Replacement Vessel Cover with Male Fitting (SKU: IP-UV-VC)
The IceCap High-Output UV Sterilizer Replacement Vessel Cover with Male Fitting (SKU: IP-UV-VC) is an authentic structural OEM replacement component distributed by CoralVue to guarantee watertight safety and protect internal electrical pathways. Aquarium ultraviolet clarification operates under constant line pressure or submersion, forcing water around a clear quartz sleeve containing an active germicidal bulb to eradicate nuisance hair algae spores, cloudy bacterial blooms, and microscopic parasites. Because the boundary between your pressurized water circuit and the dry electrical socket relies entirely on heavy physical compression joints, the condition of the top transition cover is paramount. Over years of seasonal maintenance updates, over-tightening or hard accidental impacts can cross-thread the plastic tracks, shear the internal lock channels, or fracture the main body flange. Swapping a compromised cap for this original factory male fitting keeps your system secure and leak-free.
Meticulously engineered to meet tight factory tolerances, this matte black composite cover acts as a master transition hub on the main neck tracking lines of the IceCap UV Vessel Casing, holding your internal quartz sleeve perfectly straight and centralized down the middle of the sterilization stream. Unlike non-aquarium industrial fittings that require complicated modifications, the IP-UV-VC works seamlessly with your existing factory quartz sleeve hardware and blue isolation gaskets. This ensures a clean, leak-free transition point that won't distort or leak under high pump turnover rates.
Key Features
Neutralizes Catastrophic System Flooding: Restores deep thread structural integrity at the highest-stress joint of your canister to protect dry equipment fields.
Ensures Perfect Quartz Sleeve Alignment: Holds the fragile quartz tube perfectly straight within the main cylinder to stop internal rattle damage and stress-fractures.
Tool-Free Mechanical Compression: Spins smoothly into place by hand, eliminating the need for messy plumbing paste, thread sealants, or pipe tape.
(Note: This retail SKU contains (1) individual standalone replacement male-threaded vessel cover. Threaded quartz sleeve housing nuts, blue rubber sleeve seals, internal flat gaskets, high-output bulbs, and clear quartz sleeves are sold under separate product categories).
What’s Included:
(1) IceCap Replacement High-Output UV Sterilizer Vessel Cover (Male Fitting)
Technical Specs:
Official Manufacturing Title: IceCap UV Sterilizer Vessel Cover, Male
SKU / Factory Part Identifier: IP-UV-VC
Hardware Connection Pattern: Male-Threaded External Compression Connection
Structural Framing Material Base: Saltwater-Safe, Non-Leaching High-Impact Injection Polymer
Primary Shell Color Finish: Deep Matte Black
Chassis Platform Compatibility: Form-Fitted for Designated IceCap UV Sterilizer Systems
While most of our equipment carries a one-year manufacturer's warranty, consumable products like fish and coral foods are not covered under traditional warranty terms due to their perishable nature and varied storage conditions. However, we fully stand behind the quality of every product we sell. If you experience any issues with your food purchase shortly after receiving it, such as concerns about freshness, packaging integrity, or product quality, please contact us at [email protected]. We're committed to making it right and will work with you to resolve any problems quickly and fairly.
- Unplug the main electronic ballast power supply from your wall outlet. Disconnect your dedicated feed pump lines and completely drain the internal water column inside the UV container.
- Unthread the upper cord-retaining cap, carefully pull the high-output lamp straight out of the dry core track, and lay the bulb down safely on a soft towel.
- Unthread the upper locking mechanism counter-clockwise away from the old vessel cover to free the upper lip assembly.
- Unthread the old damaged or cross-threaded male vessel cover counter-clockwise to remove it from the throat of the primary outer canister vessel body.
- Ensure your factory flat seal (Part 11) is seated perfectly flat within the neck tracking groove, and thread your new IP-UV-VC male vessel cover clockwise onto the vessel body entirely by hand until firmly locked.
- Push your blue quartz sleeve seal into place, lower the quartz sleeve down, hand-tighten your upper housing nuts clockwise into the fresh threads, perform a quick manual water leak test, and reinstall your bulb to restore power.
Pro Tips:
- Never Use Pliers, Pipe Wrenches, or Hand Tools to Tighten the Cover. When spinning your fresh IP-UV-VC male vessel cover onto the main container neck, always tighten the connection entirely by hand. Never use household pliers, strap wrenches, or channel locks. The soft polymer threads are designed to form a complete, pressurized lock under normal hand force. Using heavy metal tools will easily crack the composite collar flange or strip the threads right off your primary vessel shell, ruining your system hardware.
- Always Confirm Flat Gaskets Are Seated Level to Avoid Internal固定 Leaks. The watertight seal between this replacement male cover and the main outer canister depends entirely on the rubber seals compressed underneath it. Before threading the new cover down, double-check that the lower flat gasket hasn't shifted, twisted, or bunched out of its recessed tracking channel. An unlevel or rolled gasket creates a tiny gap that will cause a high-pressure bypass leak, spraying water directly into your equipment cabinet or sump area.
- Inspect the Casing Threads for Sharp Salt Creep Prior to Final Assembly. Before spinning your new male cover into the housing, take a soft brush and warm fresh water to clean the connecting tracks. When aquarium water evaporates near connection joints, it leaves behind sharp, hard crystalline layers of dried salt creep. Forcing a brand-new plastic fitting directly over hard mineral crystals can bind the connection or permanently scratch and cross-thread the new tracking paths. Cleaning the threads first ensures a smooth, tool-free installation.