Klir 2m Extension Cable
SKU: CV-KLIR-EXTCBL
- 100% Genuine OEM Factory Part: Distributed directly by CoralVue to guarantee exact physical terminal pinning and complete plug-and-play synchronization.
- Extended 2-Meter Reach Range: Adds an extra 6.5 feet of durable wiring clearance, letting you safely mount your electronics out of tight sump cabinets.
- Universal Roller Accommodations: Universally fits the low-voltage internal DC motor plugs of both the 4-inch (Di-4) and 7-inch (Di-7) automatic fleece filters.
- Heavy-Wall Insulated Wire Harness: Wrapped inside a thick, water-inert protective rubber jacket designed to resist salt creep, humidity, and minor binding.
- Snug Friction-Fit Socket Connectors: Molded with tight, double-sealed end ports that slip together smoothly by hand to prevent electrical signal drops under your stand.
Klir Automatic Fleece Filter 2-Meter Motor Extension Cable (SKU: CV-KLIR-EXTCBL)
The Klir Automatic Fleece Filter 2-Meter Motor Extension Cable (SKU: CV-KLIR-EXTCBL) is an authentic structural OEM replacement component distributed by CoralVue to optimize filtration equipment layouts and safeguard sensitive electronic controllers. Automated drop-in roller filters act as the primary defense against floating organic debris, continuously winding 50-micron non-woven fleece across the sump path to trap particulate waste before it decays into nitrates and phosphates. Because the system's low-voltage internal DC geared motor sits directly inside the damp mechanical sock tray chamber, its native cord length is deliberately kept short to reduce bulk. However, this short line often forces the standalone electronic controller box to sit close to high-humidity sump zones, leaving it vulnerable to accidental splashing or saltwater corrosion. This 2-meter extension cord gives you the extra reach needed to install your electronics safely out of harm's way.
Molded to meet exact factory specifications, the CV-KLIR-EXTCBL provides an instant plug-and-play bridge that drops straight into your existing hardware loop. It features a male plug configuration at one terminal end and a corresponding female receiver socket at the opposite side, matching the original wiring harness. Injection-molded from non-leaching, marine-grade rubberized polymers, the insulation sleeve handles persistent exposure to salt air and high cabinet heat cycles without degrading or becoming brittle. Adding this jumper lead to your line allows you to group your smart controls neatly on a dry side panel or hook them up to clean external mounting tracks, creating a highly organized, professional, and reliable system presentation.
Key Features
Prevents Costly Moisture Control Damage: Moves sensitive smart board microprocessors away from direct sump vapor zones and accidental skimmer cup overflows.
Maintains Continuous Signal Delivery: Thick-core conductive paths ensure clean, ripple-free current delivery, stopping false motor stalls or missed advancing cycles.
Tool-Free Inline Push Integration: Slips firmly onto your factory motor lead sockets by hand without needing specialized wire strippers, solder joints, or electrical tape.
(Note: This retail SKU contains (1) standalone 2-meter motor extension cable. Complete Klir Di-4/Di-7 fleece roller units, replacement fleece rolls, swappable sump collars, Y-link synchronization cables, and replacement power bricks are sold under separate product categories).
What’s Included:
(1) Klir Replacement Automatic Fleece Filter 2-Meter Motor Extension Cable
Official Manufacturing Title: Klir 2m Extension Cable
SKU / Factory Part Identifier: CV-KLIR-EXTCBL
Total Physical Cord Length Profile: 2 Meters (6.56 Linear Feet Profile)
Electrical Interface Style: Low-Voltage Insulated DC Power Lead Block
Wire Harness Shield Matrix: Saltwater-Safe, Non-Leaching Heavy Rubberized Over-Mold Insulation
Chassis Platform Compatibility: Form-Fitted strictly for Klir Di-4 V1/V2 and Klir Di-7 V1/V2 Motor Power Circuits
- Unplug your standalone blue Klir filter controller's primary wall transformer from your household power source to completely kill power to the loop.
- Locate the low-voltage power connection point where the roller filter's internal geared motor line plugs into the stock controller harness.
- Pull the connection points straight apart by hand to separate the short motor wire from the controller lead. Warning: Never pull directly on the thin wire strands; always grip the hard molded plastic plug heads.
- Take your fresh CV-KLIR-EXTCBL 2-Meter Extension Cable and line up the plug shapes. Push the male end firmly into the short lead coming from the roller motor.
- Route the long 6.5-foot wire along your cabinet walls up to your designated dry electronics mounting area, and press the female socket end firmly onto your controller's receiver lead.
- Mount your control box securely on a dry side wall using screws or adhesive strips, create a downward drip loop in the cable just before it enters the electronics, and restore wall power.
Pro Tips:
- Always Incorporate a Low Drip Loop to Stop Creeping Saltwater Track Lines. When routing this 2-meter extension cable from the damp mechanical compartment of your sump up to your dry control panel, always leave a loose, U-shaped drop loop in the wire harness. If salt spray or heavy condensation builds up along the line under your stand, gravity will pull the moisture down to the bottom of the loop where it safely drips away, rather than tracking straight along the insulation jacket and flooding your electronic ports.
- Secure Excess Cable Slack Cleanly with Plastic Hook-and-Loop Cable Ties. Because this wire adds a generous 6.5 feet of tracking range to your layout, you may have extra slack depending on your cabinet size. Always bundle and secure this extra wire cleanly using plastic hook-and-loop zip ties or wiring tracks. Leaving loose cord loops hanging inside an open sump space can cause them to tangle with nearby return pump intakes, get snagged during skimmer maintenance, or sit flat in pooling water, which can trigger an electrical short.
- Never Attempt to Force or Cross-Connect this Jumper to Higher Voltage AC Lines. This extension cable is custom-insulated and custom-pinned exclusively to route low-voltage 12V DC power from the native Klir controller straight to its geared motor. Never attempt to splice, modify, or cut this wire harness to pair it with high-voltage 120V household AC lines, inline aquascaping lights, or third-party power strips. Doing so will immediately cause an over-amperage electrical failure, melting the wire insulation, frying your filtration motor, and voiding your factory warranty.