IceCap Flow Pump Controller FP60
SKU: IP-FPCTL-60
- Direct OEM FP60 Replacement: Factory-original replacement controller module engineered specifically for the ultra-compact IceCap FP60 Flow Pump.
- Multiple Dynamic Wave Modes: Access Pulsing, Constant Flow, Reef Crest, and Gyre wave patterns directly using the rotary selection dial and digital display screen.
- One-Touch Feed Mode: Features a dedicated push-button pause timer to temporarily stop water circulation during fish and coral feeding.
- Wireless Master/Slave Linking: Supports wireless communication between multiple FP series controllers to synchronize or alternate water movement across the tank.
- Integrated Night Sensor Mode: Allows automatic reduction of pump output during dark hours to conserve coral energy and mimic natural reef calm.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
IceCap Flow Pump Controller FP60
Generating natural ocean current dynamics and preventing detritus buildup in small and nano marine aquariums requires reliable, precise flow control. The IceCap Flow Pump Controller FP60 (SKU: IP-FPCTL-60) is the official OEM replacement control unit designed specifically for the IceCap FP60 Flow Pump. In cabinet environments, high humidity, salt creep, or accidental water spills can degrade original controller electronics or damage display screens over time.
Designed for intuitive plug-and-play setup, this dedicated controller features a crisp digital display paired with an ergonomic rotary selection dial and touch buttons. It allows aquarists to effortlessly configure continuous flow, adjust pulse intervals, select random reef wave patterns, and sync multiple pumps wirelessly without requiring complex smartphone apps or third-party modules.
Ideal Replacement Scenario
If your existing FP60 controller screen has gone dark, buttons become unresponsive, or the unit fails to send speed signals to your FP60 pump motor block, replacing it with the authentic IP-FPCTL-60 restores full wavemaker functionality.
(Note: Package includes (1) IceCap Flow Pump Controller FP60 module with integrated mounting bracket).
What’s Included:
(1) IceCap Flow Pump Controller FP60 Module (IP-FPCTL-60)
(1) Rear Wall-Mounting Bracket
Technical Specs:
SKU / Factory Part Identifier: IP-FPCTL-60
Control Modes: Continuous Flow, Pulse Mode, Reef Crest Wave, Sine Wave, Random
Interface: Digital Display Screen with Rotary Adjustment Dial & Touch Buttons
Special Functions: 10-Minute Feed Mode, Night Mode, Wireless Master/Slave Link
Housing Material: Saltwater-Resistant Molded Polymer
Primary Compatibility: IceCap FP60 Compact Flow Pump
WARRANTY
CoralVue, Inc. hereby guarantee this product to be free from defects in material and workmanship for a period of:
- 90days
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse, or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of the owner's or his agent's first knowledge of the defect.
- That CoralVue, Inc. shall be given the first opportunity to make any repairs, replacements, or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary, or consequential damages of any nature, however arising out of the use or inability to use because of the product defect.
Click here to learn more.
Installation & Set-Up Guidelines:
Disconnect power to your IceCap FP60 setup before replacing the controller.
Unplug the pump motor lead cable and power supply plug from the old controller.
Secure the new IP-FPCTL-60 controller onto a dry cabinet wall or mounting board away from water splashes.
Plug the FP60 pump motor cable firmly into the pump output jack and connect the power supply into the power port.
Restore power, turn the rotary dial to select your preferred flow pattern and speed, and press to confirm settings.
Pro Tips:
- Mount Controller High and Away From Sump Moisture. Always mount flow controllers on the outside of cabinet doors or high on internal stand walls. Moisture, humidity, and salt creep inside enclosed stand bases are the leading causes of electronic failure.
- Sync Dual Pumps with Wireless Link Mode. If operating two FP60 flow pumps in the same tank, assign one controller as Master and the second as Slave. Setting them to "Sync" creates aligned surges, while "Anti-Sync" produces smooth back-and-forth gyre currents across your reef display.