Octo CO2 Skimmer 10in Top Cover
SKU: OCT-C2C250
MSRP: $ 53.12
-
Available Through Authorized Retailer
- Closed-Loop pH Stabilization: Designed precisely to link a large 10-inch skimmer collection neck directly to a CO2 reactor for maximum waste gas scrubbing.
- Drastically Extends Media Longevity: Recirculates moisture-rich, low-CO2 air from inside the cup to prevent delicate granular media from drying out.
- Cost-Effective System Management: Reduces overall media consumption rates compared to open-air, single-pass atmospheric draw configurations.
- Precision Molded 10-Inch Footprint: Manufactured as an exact factory-spec swap-out lid for high-capacity, heavy-duty Reef Octopus protein skimmers.
- Multi-Gas Integration Friendly: Functions beautifully as a dedicated, airtight top cover for ozone distribution when combined with carbon reactors.
- Rugged Aquarium-Grade Assembly: Constructed entirely out of premium, heavy-duty structural plastic to defy severe salt creep and moisture stress.
Reef Octopus
Globally trusted for premium protein skimmers and pumps, engineered in-house for unmatched reef filtration performance.
Reef Octopus 10-Inch CO2 Scrubber Skimmer Lid Top Cover (C2C-250)
The Reef Octopus 10-Inch CO2 Scrubber Skimmer Lid (SKU: OCT-C2C250 / Alternate: RO-C2C-250) is a specialized, premium performance upgrade engineered to transition your high-capacity filtration loop into an ultra-efficient closed-loop system. In standard ambient setups, a CO2 scrubber continuously draws raw, dry air from surrounding living spaces. This continuous dry flow rapidly strips essential moisture away from color-changing media granules, forcing the chemical bed to deplete prematurely and driving up annual maintenance costs. This targeted 10-inch replacement collection cup cover eliminates the issue by recycling the humid, scrubbed exhaust air trapped directly inside your skimmer’s massive collection column.
By routing air directly from this port back into your reactor inlet, your equipment leverages the internal moisture of the skimmer body. This closed loop keeps the media perfectly damp, amplifying its gas-binding efficiency and giving you a highly stable, elevated system pH. Manufactured with specialized integrated barbed connection ports, the C2C-250 locks down an airtight seal across monster 10-inch Reef Octopus skimmer varieties. Furthermore, this advanced replacement cover can safely pull double-duty as a heavy-duty containment cap for active ozone injection protocols when managed concurrently through a dedicated carbon reactor matrix.
Key Features
Media Preservation Dynamics: Extends the working life of soda lime absorbents by capturing and re-routing essential moisture back through the reactor loop.
Seamless Integration: Designed to match factory collection cup dimensions precisely, completely dropping into place without gluing.
Ozone Setup Compatibility: Fully equipped to handle intensive gas management systems utilizing granulated activated carbon filters.
Impact-Resistant Structural Mold: Crafted out of resilient materials to withstand structural stress under a humid aquarium cabinet.
Optimized Port Velocity: Features clear pneumatic hose connection junctions tailored to match standard reef automation configurations.
Verified 10-Inch (C2C-250) Model Compatibility
Reef Octopus Regal Series: Regal 250-S, Regal 250INT, Regal 250EXT.
Super Reef Octopus (SRO) Series: SRO-5000INT, SRO-5000SSS, SRO-5000EXT.
What’s Included:
(1) Reef Octopus 10-Inch CO2 Scrubber Skimmer Lid Replacement Cover
(Note: Clear flexible vinyl tubing lines, CO2 scrubber reactor housings, and carbon absorbent granules are sold separately)
Technical Specs:
Official Model Name: CO2 Scrubber Skimmer Lid 10" (C2C-250)
SKU / Part Number: OCT-C2C250 (Alternate: RO-C2C-250)
Product Code: RCV25294
Target Cup Nominal Diameter Profile: 10 Inches
Intended Reactor Partnership Array: Designed for Reef Octopus OCT-C2T90 System Units
Primary Material Structural Grid: Non-Corrosive Heavy-Duty Polymeric Matrix
Warranty
CoralVue, Inc. hereby guarantees this product to be free from defects in material and workmanship for a period of:
- 1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
Turn off your protein skimmer's main pump array and wipe away any loose collection foam or waste accumulation around the top rim of your cup.
Remove the original factory stock acrylic lid from your large 10-inch collection cup and store it safely for future backup use.
Align the new 10-inch C2C-250 lid over the collection cup mouth and slide it smoothly into place to verify a snug, even seat.
Attach one side of a flexible air line hose directly onto the integrated barb or nozzle fitting on the top surface of the new lid.
Guide the remaining loose end of that hose line straight to the input manifold or base chamber nozzle of your external CO2 Scrubber Reactor.
Restart your skimmer injection system, check all connection junctions to confirm zero air blockages, and enjoy an optimized closed-loop system.
Pro Tips:
- Confirm Your Cup Diameter Across Series Boundaries. Reef Octopus scales their skimmers carefully by matching specific cup numbers to matching body diameters. The C2C-250 is configured exclusively to mount securely over a 10-inch external cup track, perfectly servicing large-scale 250-level and 5000-level skimmers. If you run a smaller 200-level system or a massive 300-level footprint, do not attempt to force this model to fit. Check your model number first and match it to the specific C2C companion lid layout.
- Keep the Air Barbs Clean of Skimmate Backlog. Because this lid operates directly over an active collection vortex, vigorous skimming cycles can occasionally throw wet foam and organic waste upwards onto the underside of the cover. During your weekly collection cup cleanings, run warm freshwater directly through the lid's integrated air nozzle ports. Ensuring this pathway stays completely free of dried organic buildup prevents restriction points that can choke your skimmer pump's air draw.
- Avoid Extreme Tubing Kinks. When routing the air hose line from your newly installed 10-inch lid to the intake track of your media chamber, keep the loop loose with gentle, radiused arcs. Bending flexible vinyl or silicone tubing at harsh right angles will severely pinch the air path. This restriction starves the skimmer venturi of necessary air injection volume, causing the internal water level within the main skimmer cylinder to rise rapidly and potentially trigger an overflow.