?unique=9ecd6e9)
IceCap Skimmer Stand, Small (7in x 6in)
SKU: IC-SRS-1815
MSRP: $ 34,64
-
Available Through Authorized Retailer
- Dual-Oriented Height Elevations: Flips over effortlessly to establish either a static 3-inch (3in) or 4-inch (4in) height elevation, accommodating your target sump water level.
- Premium Heavy-Cast Acrylic: Fabricated using ultra-thick, optical-grade sheet acrylic to handle heavy skimmer bodies without warping or cracking under pressure.
- Open-Frame Drainage Geometry: Clever hollow base framework allows full, unobstructed water flow around the stand, preventing stagnant detritus traps beneath the riser.
- Integrated Rubber Isolation Dampeners: Outfitted with soft vibration-absorbing rubber feet to isolate active skimmer pump resonance, lowering irritating cabinet humming.
- Compact Space-Saving Footprint: Small 7.0" x 6.0" dimensions fit comfortably inside tight sump compartments, refiltration lanes, or small return pump chambers.
- 100% Inert and Reef-Safe: Constructed with high-strength plastic weld bonds that will not corrode, leach toxins, or affect delicate coral reef water chemistry.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
IceCap Small Protein Skimmer Stand — 7" x 6" (SKU: IC-SS-S76)
The IceCap Small Protein Skimmer Stand (SKU: IC-SS-S76) is an authentic, solid-cast acrylic height-elevation platform distributed by CoralVue to unlock peak performance and consistency from high-efficiency internal protein skimmers. Modern needle-wheel protein skimmers rely on a delicate internal balance of air and water pressure inside their body chambers to form a stable foam neck. Sump compartments are frequently baffled to depths between 8 to 11 inches, which is often too deep for compact or space-saving nano skimmers. This excessive water pressure results in flooded skimmer cups or inconsistent skimming action. The IceCap Small Riser solves this by elevating your skimmer base to its optimal manufacturer-recommended water depth, ensuring consistent, dark skim-mate extraction.
The primary design advantage of the IC-SS-S76 is its Dual-Sided Structural Layout. The riser is meticulously engineered so that it can be flipped over to provide two distinct fixed elevations. Depending on which face rests against your sump floor, the platform securely lifts your equipment by either 3 inches or 4 inches. Unlike makeshift blocks or loose grading alternatives that trap decaying debris, this riser features an open, smooth arch frame. This allows moving sump water to sweep through the structure continuously, preventing localized detritus traps. Complete with non-skid rubber feet to prevent equipment migration on slippery glass, this clear riser keeps your filtration running smoothly.
Key Features
Locks in Peak Skimming Adjustments: Elevating your equipment isolates the skimmer body from daily evaporation water fluctuations, keeping your foam line consistent.
Stops Annoying Sump Vibrations: Integrated rubber feet act as structural shock absorbers, capturing continuous needle-wheel pump vibration before it turns into loud cabinet noise.
Virtually Invisible Sump Integration: Crystal-clear cast acrylic styling lets light pass through seamlessly, ensuring your sump remains looking clean, modern, and uncluttered.
(Note: This retail package includes (1) fully assembled, dual-sided 7" x 6" Small Skimmer Stand. Protein skimmers, collection cups, and auto-waste collectors are sold under separate categories).
IceCap Heavy-Duty Acrylic Skimmer Stand Continuum
| Riser Model Classification | Product SKU | Physical Platform Footprint | Dual-Elevation Height Yields |
|---|---|---|---|
| IceCap Skimmer Stand — Small | IC-SS-S76 | 7.0" x 6.0" Inches | 3.0" or 4.0" Inch Lifting Heights |
| IceCap Skimmer Stand — Medium | IC-SS-M97 | 9.0" x 7.0" Inches | 3.0" or 4.0" Inch Lifting Heights |
| IceCap Skimmer Stand — Large | IC-SS-L119 | 11.0" x 9.0" Inches | 3.0" or 4.0" Inch Lifting Heights |
What’s Included:
(1) IceCap Small 7in x 6in Dual-Sided Clear Acrylic Skimmer Stand
(4) Factory Pre-Installed Non-Slip Rubber Vibration-Dampening Isolation Pads
Technical Specs:
Official Manufacturing Title: IceCap Small Skimmer Stand (7in x 6in)
SKU / Factory Part Identifier: IC-SS-S76
Platform Top Surface Dimensions: 7.0" x 6.0" (7.0in×6.0in)
Selectable Elevation Lifts: 3.0 Inches OR 4.0 Inches (3.0in/4.0in)
Material Composition Profile: Heavy-Duty Cast Optical Grade Clear Acrylic
Max Structural Weight Capacity: Safely supports equipment up to 15 lbs (Dry Weight)
Application Placement Compatibility: Saltwater Reef Sumps, Refugiums, and Freshwater In-Sump Chambers
Warranty
CoralVue, Inc. hereby guarantees this product to be free from defects in material and workmanship for a period of:
- 1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
- Unbox your IceCap Small Skimmer Stand. Inspect the clear acrylic edges and verify all four soft rubber isolation pads are secure on their mounting tracks.
- Check your protein skimmer's instruction sheet to find its optimal running water depth (typically between 6.5" to 8" depending on the model brand).
- Measure your sump chamber's standing water level. Deduct your skimmer's target depth from the total sump depth to select your required lift height. Example: An 11-inch deep sump running a skimmer that requires a 7-inch operating depth needs a 4-inch lift.
- Place the stand into your sump chamber, flipping it so the target height dimension (3" or 4") faces vertically. Ensure all four rubber feet sit completely flat on the bottom glass panel.
- Lower your protein skimmer down into the sump and set its bottom plate squarely on top of the clear acrylic platform. Ensure no part of the skimmer base plate overhangs the edges of the stand.
- Connect your skimmer's power cable, turn on the pump feed, and check for stability. If the pump's torque causes the stand to rattle against the glass, double-check that no stray bits of gravel or sand are trapped under the rubber feet.
Pro Tips:
- Clean the Glass Beneath the Riser Platform During Your Annual Sump Teardowns. Even though the open-frame arch design of the IC-SS-S76 promotes active water turnover to prevent debris traps, a microscopic layer of organic biofilm and dust can still settle directly under the small rubber footprints over several months. Whenever you take your protein skimmer out for its deep annual pump cleaning, slide the clear stand out and wipe the bottom sump glass clean to prevent any slick biological films from breaking down your non-skid grip.
- Ensure the Entire Skimmer Footprint Sits Center-Weighted on the Riser Face. When placing your skimmer onto the 7x6 inch platform, carefully verify that its internal or external pump, silencer bracket, and exhaust gate valve mechanisms are centered evenly over the stand. Allowing a heavy skimmer pump assembly to hang completely off one edge can create uneven weight distribution, which can tilt the acrylic frame or reduce the dampening power of the rubber feet, causing minor vibrations.
- Double-Check the Riser Height Prior to Ordering a New Skimmer Body Upgrade. If you are planning to upgrade your skimmer model in the future, save your layout geometry dimensions. The compact 7" x 6" platform profile is perfect for space-saving nano and small-body skimmers up to 5 or 6 inches in diameter. Before purchasing a larger filtration upgrade, verify that the new skimmer’s molded plastic base plate or screw down feet will slide cleanly onto the 7x6 footprint without hanging over the edges.