JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
IceCap Algae Turf Scrubbers are a plug-and-play solution to battle algae as a natural water filter to remove nitrate, phosphate, and other pollutants from aquarium water directly from a sump. Available in three sizes.
AGS PRO In-Sump Scrubber user instructions - Click Here
IceCap PRO Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed—thereby removing contaminants from your tank in the process. This all-natural form of water filtration can reduce and even eliminate the need for water changes. Best of all, with their adjustable height, these algae scrubbers reside directly in your sump! No plumbing required, no mess to make. Plug-and-play even comes with it's own IceCap EVO feed pump.
Item #: IC-AGS-100PRODimensions: 10.8 x 6.15 x 17in (LxWxH)LED Lamp Number: 2 x 7wTotal LED Wattage: 14wScreen Size: 8.5 x 6inWater Pump: EVO-1000 (20w)Water Depth Range: 4-10inMax Flowrate: 250gphTank Rating: Aquariums up to 100gal
Item #: IC-AGS-200PRODimensions: 12.5 x 6.15 x 21in (LxWxH)LED Lamp Number: 2 x 14.5wTotal LED Wattage: 29wScreen Size: 11.8 x 7.4inWater Pump: EVO-1000 (20w)Water Depth Range: 4-10inMax Flowrate: 500gphSafety Drain Size: 1/2inRecommended Flow: 500gphTank Rating: Aquariums up to 225gal
Item #: IC-AGS-400PRODimensions: 16.5 x 6.15 x 21in (LxWxH)LED Lamp Number: 2 x 18wTotal LED Wattage: 36wScreen Size: 15.8 x 11.8inWater Pump: EVO-2000 (30w)Water Depth Range: 4-10inMax Flowrate: 800gphTank Rating: Aquariums up to 350gal
IceCap Algae Scrubbers are designed to be placed directly into a sump so that the water flowing through the unit can drain directly back into the normal filtration system. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begin to grow on the screen, it “scrubs” the aquarium water of excess nutrients, resulting in less algae growing inside the display tank. Once the screen is covered in algae, it can be “harvested” by removing a sizable portion, thereby removing the contaminants from the system.
Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks.
Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.