90mm Metric Pipe Carrier
SKU: PVC-PCAR-90
- Industrial Support: Provides essential stabilization for heavy 90mm metric piping, preventing sagging and stress on solvent joints.
- Metric Precision: Specifically sized for 90mm metric PVC pipe (approx. 3.54" OD), the standard for commercial Reef Octopus life support systems.
- High-Tension Grip: Features a secure snap-fit design that keeps pipes seated even during high-flow surges or water hammer.
- Corrosion Proof: Constructed from high-strength, saltwater-safe technical polymers that will not rust or degrade in humid pump rooms.
- Vibration Isolation: Helps isolate heavy pump vibrations from the wall or filtration rack for a quieter system operation.
- Ideal For: Securing primary 90mm return lines; mounting commercial manifolds; organized life support system (LSS) racks.
Reef Octopus
Globally trusted for premium protein skimmers and pumps, engineered in-house for unmatched reef filtration performance.
90mm Metric Pipe Carrier
The 90mm Metric Pipe Carrier (Pipe Clip) is a high-capacity structural component designed for the organized and secure installation of large-diameter plumbing in professional aquarium exhibits and industrial aquaculture facilities. Precision-engineered to hold 90mm Metric PVC pipe, this carrier acts as a heavy-duty mounting bracket that anchors your primary life support lines to walls, filtration racks, or aquarium stands.
In large-scale life support engineering, 90mm pipes carry immense weight when filled with water. Without proper support, this weight can cause pipes to sag over horizontal spans, putting lethal leverage stress on bulkheads and solvent joints. This carrier provides a rigid, professional mounting point that ensures your 90mm plumbing remains perfectly aligned and stationary. Constructed from industrial-grade, non-corrosive technical polymers, it is specifically designed to survive the harsh, humid, and salt-heavy environments of a commercial pump room.
Key Features
True Metric Calibration: Custom-contoured to fit the 90mm OD metric pipe used in Reef Octopus commercial-spec filtration and European exhibits.
Professional Organization: Allows for clean, parallel plumbing runs, making it easier to identify, label, and service lines in complex systems.
High-Load Capacity: Engineered to support the significant weight of 90mm water-filled pipes over horizontal or vertical runs.
Saltwater Safe: 100% non-metallic construction; will not rust, pit, or leach chemicals when exposed to saltwater spray.
Snap-Fit Accessibility: The bracket design allows pipes to be "snapped" in and out, facilitating easier maintenance and reconfiguration without tools.
Ideal For
Commercial Return Lines: Securing primary 90mm return pipes to the facility wall or equipment stand.
Industrial Skimmer Support: Anchoring the large recirculating plumbing on commercial Reef Octopus skimmers to prevent vibration wear.
LSS Manifolds: Building modular, organized plumbing racks for multi-tank aquaculture systems.
Images shown are representative of the product family. Materials, sizes, and configurations may vary.
What’s Included:
(1) 90mm Metric Pipe Carrier (Bracket)
Specifications:
Size: 90mm
Mounting Type: Reinforced Base Mount
Material: High-Strength Industrial Polymer
Compatibility: 90mm Metric Pipe ONLY
- Determine the necessary spacing for your carriers. For 90mm pipe, we recommend a carrier every 3–4 feet on horizontal runs to prevent sagging.
- Mark the mounting holes on your wall or rack, ensuring they are perfectly level for a professional finish.
- Secure the carrier to the surface using appropriate stainless steel hardware (not included).
- Firmly press the 90mm metric pipe into the carrier until it "snaps" securely into the cradle.
- Ensure the pipe is supported near heavy valves, elbows, and union connections to minimize stress points.
- To remove the pipe, pull it away from the base with firm, steady pressure.
Pro Tips:
- Metric vs. Standard 3.5-Inch. A 90mm pipe carrier is designed specifically for 90mm OD metric pipe (approx. 3.54 inches). It will not fit standard US 3-inch pipe (3.5" OD) or 4-inch pipe (4.5" OD). Always verify your pipe diameter with a caliper before mounting your brackets.
- Vibration Dampening. In commercial systems with high-pressure pumps, vibrations can transfer into the building structure. For maximum noise reduction, you can place a thin strip of EPDM rubber or a neoprene gasket between the pipe and the carrier to act as a vibration isolator.
- Stainless Hardware is Key. While the carrier itself is non-corrosive, always use Grade 316 Stainless Steel hardware to mount the carrier. Standard galvanized or zinc-plated screws will rust quickly in a marine filtration environment, leading to structural failure and unsightly stains.