Milwaukee 10.01pH Buffer Calibration Solution, 230 ml
SKU: CV-MA9010
- The Milwaukee 10.01pH Buffer is a 230mL solution for calibrating pH meters, probes, and testers.
- It is made for pH meters, pens, probes, monitors, and controllers that use a 10.01 calibration point.
- The ±0.01 pH accuracy helps support repeatable calibration for aquarium, service, and lab pH readings.
- The 230mL bottle gives more solution for repeat use than single packets used for one calibration.
Milwaukee
Milwaukee Instruments is a leading European maker of digital electrochemistry devices.
pH 10.01 Calibration Buffer Solution for pH Meters
The Milwaukee 10.01pH Buffer Calibration Solution 230ml is a ready-to-use pH 10.01 buffer for pH meters, probes, testers, monitors, and controllers. It is used during calibration when the meter requires a 10.01 pH reference point.
This 230mL bottle is useful for hobbyists, stores, and service techs who calibrate pH equipment often. The solution is rated at ±0.01 pH accuracy, helping support steady calibration when used with clean probes and proper meter instructions.
Key Features:
- pH 10.01 calibration buffer solution for pH meters and probes.
- 230mL bottle format for repeat calibration use.
- Standard ±0.01 pH accuracy for repeatable calibration.
- Ready-to-use liquid avoids powder mixing.
- Used with pH testers, pens, monitors, controllers, and probes.
- Helps verify or adjust pH readings during routine calibration.
- Suitable for aquarium, service, and general pH meter maintenance.
Ideal For:
- Aquarium hobbyists calibrating pH meters that require a 10.01 buffer point.
- Service techs and stores that calibrate pH probes more than once or twice.
- Controller users maintaining pH probes for reef tanks, freshwater systems, or dosing setups.
What's Included:
• 1 Milwaukee 10.01pH Buffer Calibration Solution 230mL bottle
Specifications:
- Brand: Milwaukee
- Product Name: Milwaukee 10.01pH Buffer Calibration Solution 230ml
- SKU: CV-MA9010
- Product Type: pH calibration buffer solution
- pH Value: 10.01
- Accuracy: Standard ±0.01 pH
- Bottle Volume: 230mL
- Format: Ready-to-use liquid bottle
- Use: pH meter, tester, probe, monitor, and controller calibration
Manufacturer-Warrantied Brands
Some of the brands we carry are covered by the manufacturer's own warranty rather than a CoralVue warranty. Warranty terms vary by brand — we recommend visiting the manufacturer's official website or contacting them directly for current coverage details and the claims process.
If you're not sure which category a product falls into, our customer service team is happy to help.
Instructions:
- Shake the bottle gently before use if directed by the meter or solution instructions.
- Pour a small amount of 10.01pH buffer into a clean calibration cup.
- Rinse the pH probe or tester tip with clean water before calibration.
- Place the probe or tester tip into the 10.01pH buffer.
- Wait for the reading to stabilize.
- Complete the calibration step according to the meter, monitor, or controller instructions.
- Rinse the probe after calibration before placing it into another buffer or back into the aquarium system.
- Discard used buffer. Do not pour it back into the bottle.
- Close the bottle tightly after use and store it away from heat and direct light.