Milwaukee 10.01pH Buffer 20 ml Calibration Packet
SKU: CV-MA10010
- The Milwaukee 10.01pH Buffer Packet is a sealed 20mL solution for calibrating pH meters and probes.
- It is made for pH testers, pens, monitors, and controllers that need a 10.01 calibration point.
- The ±0.01 pH accuracy and 25°C value help support repeatable readings during meter calibration.
- Each packet gives a fresh single use, reducing storage errors from opened bottles or mixed powder.
Milwaukee
Milwaukee Instruments is a leading European maker of digital electrochemistry devices.
pH 10.01 Calibration Buffer Packet for pH Meters
Use this buffer when a pH meter requires a 10.01 calibration point. The solution is rated at ±0.01 pH accuracy and is packaged as a single packet, which helps provide fresh solution for occasional use, service kits, or field calibration.
Key Features:
- pH 10.01 calibration buffer solution for pH meters and probes.
- Includes one sealed 20mL packet.
- Standard ±0.01 pH accuracy for repeatable calibration.
- Ready-to-use format avoids powder mixing.
- Sealed packet helps protect the solution until use.
- Single-packet format is useful for occasional or field calibration.
- Compatible with pH testers, pens, probes, monitors, and controllers that use a 10.01 buffer point.
Ideal For:
- Aquarium hobbyists calibrating pH meters that require a 10.01 buffer point.
- Service techs carrying single-use pH buffer packets for field calibration.
- Stores or maintenance teams that want fresh buffer without opening a full bottle.
Pro Tips:
- Use fresh solution for calibration. Open the packet when you are ready to calibrate. Do not pour used buffer back into the packet.
- Match the buffer to the meter steps. Many pH meters use two-point calibration. Use the buffer values listed in the meter’s manual.
- Rinse between solutions. Rinse the probe with clean water before moving between calibration buffers. This helps avoid cross-contamination.
- Let the reading settle. Give the probe time to stabilize in the buffer before confirming calibration. Fast movement can cause poor results.
- Store unopened packets properly. Keep packets closed and away from heat and direct light until use.
What's Included:
• 1 Milwaukee 10.01pH Buffer 20mL Calibration Packet
Specifications:
- Brand: Milwaukee
- Product Name: Milwaukee 10.01pH Buffer 20ml Calibration Packet
- SKU: CV-MA10010
- Product Type: pH calibration buffer solution
- pH Value: 10.01
- Accuracy: Standard ±0.01 pH
- Packet Volume: 20mL
- Quantity: 1 packet
- Format: Sealed single-use packet
- Use: pH meter, tester, probe, monitor, and controller calibration
Manufacturer-Warrantied Brands
Some of the brands we carry are covered by the manufacturer's own warranty rather than a CoralVue warranty. Warranty terms vary by brand — we recommend visiting the manufacturer's official website or contacting them directly for current coverage details and the claims process.
If you're not sure which category a product falls into, our customer service team is happy to help.
Instructions:
- Open the sealed 20mL packet when ready to calibrate.
- Rinse the pH probe or tester tip with clean water before calibration.
- Insert the tester or probe into the 10.01pH buffer packet.
- Wait for the reading to stabilize.
- Complete the calibration step according to the meter or controller instructions.
- Rinse the probe after calibration before placing it into another buffer or back into the aquarium system.
- Discard used buffer after calibration. Do not reuse used solution.
- Store unopened packets away from heat and direct light.