IceCap 10G AIO Return Tubing & Sock Bracket Kit
SKU: IP-AIO10G-Kit
- This kit replaces the return tubing, female-threaded union, and filter sock bracket on an IceCap 10G AIO tank.
- Use it when the return line or filter sock bracket on your IceCap 10G AIO needs to be replaced.
- The tubing and threaded union rebuild the return path from the pump, and the bracket holds the filter sock.
- Every part is matched to the IceCap 20G AIO, so you do not have to guess tubing or fitting sizes yourself.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
![[Consumer Shipping Information] 📦 Shipping FAQ](/web/image/dr.website.content/27/image/%5BConsumer%20Shipping%20Information%5D%20%F0%9F%93%A6%20Shipping%20FAQ?unique=c9a01e5){kind=small}
Replacement Return Tubing and Filter Sock Bracket for 10G AIO Aquariums
The IceCap 10G AIO Return Tubing & Sock Bracket Kit gives you the parts to replace the return line and filter sock mount on your IceCap 10-gallon all-in-one cube. If a part is lost, damaged, or worn out, you can swap it without replacing the whole plumbing set.
The return tubing carries water from the pump back to the display tank. The female threaded union joins the tubing to your plumbing. The filter sock bracket holds your filter sock in place so debris is caught before it reaches the filter chamber.
Key Features:
- Return tubing for the flow path from the pump to the display
- Female threaded union for connecting the tubing to threaded plumbing
- Filter sock bracket to hold the filter sock in the rear chamber
- Sized for the IceCap 10G AIO Aquarium
Ideal For:
- Owners of an IceCap 10G AIO who need to replace a lost or damaged return line
- Hobbyists whose filter sock bracket is cracked, bent, or missing
- Reefers rebuilding the return plumbing during a tank refresh or maintenance
Pro Tips:
- Dry fit before you tighten. Test the tubing and union without locking them down. Make sure the tubing sits where you want it before you finish the install.
- Check the sock fit after you install the bracket. Make sure the sock sits snug so water passes through the mesh, not around it.
- Run the pump and look for leaks. Watch the union and tubing joints for a few minutes after you refill, then check again after an hour.
What’s Included:
- Return tubing with female-threaded union
- Filter sock bracket
Specifications:
- Brand: IceCap
- SKU: IP-AIO10G-Kit
- Compatibility: IceCap 10G AIO Aquarium
WARRANTY
CoralVue, Inc. hereby guarantee this product to be free from defects in material and workmanship for a period of:
- 90days
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse, or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of the owner's or his agent's first knowledge of the defect.
- That CoralVue, Inc. shall be given the first opportunity to make any repairs, replacements, or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary, or consequential damages of any nature, however arising out of the use or inability to use because of the product defect.
Click here to learn more.
Instructions:
- Turn off the return pump and unplug it.
- Remove the old tubing, union, or sock bracket from the tank.
- Dry-fit the new parts to check the fit.
- Tighten the union.
- Restore power and check every joint for leaks.