%20?unique=9ecd6e9)
.webp?unique=9e77fe5)
%20?unique=9ecd6e9)
.webp?unique=9e77fe5)
HYDROS 100' Command Bus Cable (Data ONLY)
SKU: HDRS-CBC-D100
HYDROS
USA-built aquarium automation system that monitors & controls equipment from an intuitive app.
Data-Only Command Bus Cable for HYDROS Collective Systems
The HYDROS 100 ft Data-Only Command Bus Cable connects HYDROS devices so they can communicate as part of a Collective. This cable is for data communication only. It does not send power from one HYDROS device to another.
Use this cable when a HYDROS system needs a long Command Bus run, but each controller or device will have its own power source. That makes it useful for larger equipment rooms, remote sumps, fish rooms, or controller boards mounted far apart.
Key Features
• 5-pin HYDROS Command Bus cable for device communication.
• Data-only design allows communication without passing power between units.
• 100 ft length supports long runs between separated HYDROS devices.
• Helps connect HYDROS devices into a shared Collective.
• Useful when each connected controller has its own local power supply.
• Helps keep communication and power distribution separate in larger HYDROS layouts.
• Compatible with HYDROS devices that use Command Bus ports.
• Supported by CoralVue and HYDROS 6-month limited warranty.
Ideal For
• HYDROS Collectives with controllers installed far apart from each other.
• Aquarium systems with remote sumps, fish rooms, or separate equipment areas.
• Builds where each HYDROS device has local power and only data needs to travel through the cable.
Pro Tips
• Use the right cable type. DATA ONLY cables do not pass power. Use this cable only when each connected HYDROS device has its own power source.
• Plan power before routing the cable. A long data-only run still needs powered HYDROS devices at each end. Confirm power supplies before final mounting.
• Terminate the Command Bus correctly. HYDROS Command Bus systems use terminators at the ends of the bus. Add terminators where the layout requires them.
• Label both ends of the run. A 100 ft cable may pass through walls, stands, or equipment rooms. Labeling both ends makes future service easier.
• Keep the cable path serviceable. Avoid pinching, tight bends, or routes that cannot be reached later. Leave enough slack to remove a controller if needed.
Product Specifications
Cable length: 100ft
Cable type: Data-only Command Bus cable
Warranty
CoralVue, Inc. hereby guarantees this product to be free from defects in material and workmanship for a period of:
- 1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.