?unique=9ecd6e9)
.webp?unique=1792bf4)
?unique=9ecd6e9)
.webp?unique=1792bf4)
HYDROS 120' Command Bus Cable (Data ONLY)
SKU: HDRS-CBC-D120
HYDROS
USA-built aquarium automation system that monitors & controls equipment from an intuitive app.
Data-Only Command Bus Cable for HYDROS Collective Systems
The CoralVue HYDROS System Command Bus Cable (DATA ONLY) connects HYDROS devices so they can communicate across a HYDROS system. This version is made for data communication only. It does not send power from one HYDROS device to another.
Use this cable when a HYDROS build needs a longer Command Bus run, but each connected device will have its own power source. That makes it useful for larger controller layouts, separated equipment zones, or installations where power should not be shared through the Command Bus cable.
Key Features
• 5-pin HYDROS Command Bus cable for HYDROS device communication.
• Data-only design allows communication without passing power between units.
• Helps connect HYDROS devices into a shared Collective.
• Useful for longer Command Bus runs where local power is available at each device.
• Works with HYDROS devices that use Command Bus ports.
• Helps separate communication from power distribution in larger HYDROS layouts.
• Supported by CoralVue and HYDROS 6-month limited warranty.
Ideal For
• HYDROS users adding a device that already has its own power source.
• Larger aquarium systems with controllers mounted in separate equipment areas.
• Builds where a DATA+Power Command Bus cable is not the right cable choice.
Pro Tips
• Use the right cable type. DATA ONLY cables do not pass power. Use them only when each connected HYDROS device has its own power source.
• Plan the Collective before routing cable. Map each Command Bus connection first. This helps avoid crossing power zones or using the wrong cable type.
• Terminate the Command Bus correctly. HYDROS Command Bus systems use terminators at the ends of the bus. Add terminators where the system layout requires them.
• Keep cable runs serviceable. Route the cable so each device can be removed or serviced without pulling apart the whole controller board.
• Label long runs. Mark both ends of the cable. This makes future controller changes faster and reduces mistakes during service.
Product Specifications
Cable length: 120ft
Cable type: Data-only Command Bus cable
Warranty
CoralVue, Inc. hereby guarantees this product to be free from defects in material and workmanship for a period of:
- 1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.