IceCap Phosphate+Nitrate Removal Pad
SKU: IC-PNRP
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
Phosphate and Nitrate Filter Pad for Aquarium and Pond Filters
The IceCap Phosphate & Nitrate Removal Filter Pad is a cut-to-size filtration pad for ponds, marine aquariums, and freshwater aquariums. It is made to sit in the path of water flow and help remove phosphate, nitrate, and trapped debris before they continue through the system.
Use it in wet/dry filters, sumps, canister filters, and other filter paths where water can pass through the pad. The 10 x 18 inch sheet can be cut to fit the filter space, so it works in many common aquarium and pond setups.
Key Features
• Cut-to-size phosphate and nitrate removal pad for aquarium and pond filters.
• Made for ponds, marine aquariums, and freshwater aquariums.
• Can be used in wet/dry filters, sumps, canister filters, and other filter paths.
• Traps excess food, waste, detritus, and other free-floating debris.
• Helps remove solid organic compounds before they break down in the water.
• Can be combined with other IceCap filter pads for layered filtration.
• 10 x 18 inch sheet can be trimmed to fit the filter area.
Ideal For
• Freshwater tanks or ponds where nitrate and phosphate control is part of routine maintenance.
• Marine aquariums using sump, canister, or wet/dry filtration.
• Hobbyists who want a cut-to-fit pad that can be layered with other mechanical or chemical pads.
Pro Tips
• Place it where water must pass through it. The pad works best when water flows through the full surface, not around the edges.
• Cut it slightly oversized. A snug fit helps reduce bypass and keeps debris from slipping around the pad.
• Replace it before it clogs. A dirty pad can slow flow and trap waste too long. Change it as part of normal filter maintenance.
• Use it after a coarse pad. A coarse pre-filter can catch larger debris first, helping this pad focus on finer waste and nutrient control.
• Do not rinse and reuse it forever. Once the pad is exhausted or packed with debris, replace it instead of relying on rinsing alone.
Warranty
CoralVue, Inc. hereby guarantees this product to be free from defects in material and workmanship for a period of:
- 1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
- Measure the filter tray, sump chamber, canister basket, or water-flow path where the pad will be placed.
- Cut the 10 x 18 inch pad to fit the filter area.
- Place the pad where water must pass through it, not around it.
- Use a coarse mechanical pad before this pad if the system collects large debris.
- Replace the pad regularly as it becomes dirty or flow begins to slow.
- Do not use the pad where it can block all water flow if it clogs.
- Combine with other filter pads only when the filter has enough room and flow is not restricted.