IceCap White Poly Fiber Pad
SKU: IC-WFP
MSRP: $ 11.54
-
Available Through Authorized Retailer
- The IceCap White Poly Fiber Pad is a cut-to-size filter pad that removes particulates from water.
- It is made for ponds, marine tanks, and freshwater filters like wet/dry, sump, and canister systems.
- It traps food, waste, and debris before they reach bio media or break down into ammonia and nitrate.
- The 10 x 18-inch sheet cuts to fit many filter paths and works as a first layer before other pads.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
Poly Fiber Filter Pad for Aquarium and Pond Filters
The IceCap White Poly Fiber Filter Pad is a cut-to-size filtration pad for ponds, marine aquariums, and freshwater aquariums. It is made to remove free-floating debris and particulates as water passes through the filter path. Use it in wet/dry filters, sumps, canister filters, and other areas where water can flow through the pad. The 10 x 18-inch sheet can be cut to fit the filter space, making it useful as a first layer before biological or chemical filter media.
Key Features
- Cut-to-size white poly fiber filter pad for aquarium and pond filters.
- Made for ponds, marine aquariums, and freshwater aquariums.
- Removes particulates from water as it passes through the pad.
- Traps excess food, waste, debris, and other free-floating solids.
- Works as a pre-filter before biological and chemical filter media.
- Can be used in wet/dry filters, sumps, canister filters, and other filter paths.
- Can be combined with ammonia, nitrate, phosphate, and carbon filter pads.
- 10 x 18-inch sheet can be trimmed to fit the filter area.
Ideal For:
- Freshwater aquariums or ponds that need basic mechanical debris removal.
- Marine aquariums using sump, canister, or wet/dry filtration.
- Hobbyists who want a cut-to-fit pre-filter pad before chemical or biological media.
Pro Tips
- Place it before other media. Use this pad before biological or chemical media so larger debris is trapped first.
- Cut it slightly oversized. A snug fit helps keep water from bypassing the pad around the edges.
- Change it before it clogs. A packed pad can slow flow and hold waste too long. Replace it as part of normal filter service.
- Use it as the first layer. When stacking pads, place the white poly fiber pad first, then use specialty pads for carbon, ammonia, nitrate, or phosphate control.
- Do not rinse and reuse it forever. Rinsing may remove loose debris, but the pad should be replaced once it is worn, clogged, or holding waste.
Dimensions:
- Size: 10-inch x 18-inch
- Type: Cut to Size
Warranty
CoralVue, Inc. hereby guarantees this product to be free from defects in material and workmanship for a period of:
- 1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
- Measure the filter tray, sump chamber, canister basket, or water-flow path where the pad will be placed.
- Cut the 10 x 18 inch pad to fit the filter area.
- Place the pad where water must pass through it, not around it.
- Use this pad before biological or chemical filter media when using it as a pre-filter.
- Replace the pad regularly as it becomes dirty or flow begins to slow.
- Do not place the pad where it can block all water flow if it clogs.
- Combine with other filter pads only when the filter has enough room and flow is not restricted.