IceCap AGS Pro 400 Turf Scrubber Power Supply
SKU: IP-AGSP400-PSU
- Direct OEM Replacement: Factory-original replacement power adapter engineered specifically for the large IceCap AGS-400 PRO Turf Scrubber series.
- Powers Dual LED Arrays (36W Total): Sized to drive the total 36W growth light system for maximum nutrient scrubbing performance.
- Regulated DC Output: Delivers constant DC voltage to protect internal LED chips and driver circuitry from electrical surges and current fluctuations.
- Universal Household AC Input: Operates on standard 100V–240V AC inputs (50/60Hz) for plug-and-play installation into wall outlets or timers.
- Moisture-Resistant Connectors: Equipped with sealed barrel connection leads designed to withstand high humidity in under-cabinet sump environments.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
IceCap AGS Pro 400 Turf Scrubber Power Supply
Promoting dense growth of turf algae across your scrubber screen requires consistent, high-intensity illumination. The IceCap AGS Pro 400 Turf Scrubber Power Supply (SKU: IC-AGS400-PS) is the official OEM replacement AC/DC power transformer built specifically for the Large IceCap AGS-400 PRO Algae Turf Scrubber (In-Sump & External models). Because aquarium sump cabinets operate under high humidity, power adapters can suffer from salt creep corrosion, fluid splashes, or electrical wear over time.
This factory replacement power unit converts AC household wall power to the precise direct current required to drive the dual LED grow light strip array (36W total capacity). Regulated voltage output ensures consistent light output along both sides of the growth screen while protecting sensitive light arrays against thermal overload and power spikes.
System Compatibility Note
This power supply is calibrated specifically for the Large AGS-400 PRO series (36W total LED output). For small (AGS-100) or medium (AGS-200) scrubber units, select the corresponding wattage power supply adapter.
(Note: Package includes (1) replacement power supply transformer with molded DC output connection cables).
What’s Included:
(1) IceCap AGS Pro 400 Replacement LED Power Supply Adapter
Technical Specs:
SKU / Factory Part Identifier: IC-AGS400-PS
Input Voltage Range: 100V–240V AC (50/60Hz)
Target Load Capacity: 36W Total LED Power
Output Connector: Molded DC Barrel Plug
Color: Standard OEM Black
Primary Compatibility: IceCap Large AGS-400 PRO In-Sump & External Turf Scrubbers
Installation & Set-Up Guidelines:
Unplug the existing lighting power supply from your wall outlet, digital timer, or aquarium controller.
Disconnect the female DC power leads on the adapter from the male connectors extending from the two LED light strips.
Attach the output leads of the new IC-AGS400-PS power supply firmly to the LED light strip connections until fully seated.
Plug the power transformer brick into a timer or controllable outlet programmed for your preferred reverse photoperiod (typically 12 hours daily).
Verify that both side LED light panels illuminate uniformly across the growth screen.
Pro Tips:
- Incorporate a Drip Loop. Always install a safety drip loop on the AC power wire before plugging into an electrical socket. This prevents condensed water droplets or salt spray from traveling down the power wire into electrical outlets.
- Automate Reverse Daylight Schedules. Plug this power supply into a digital timer to run the scrubber lights for 12 hours opposite your display tank's lighting schedule. Photosynthesis in the scrubber during the night cycle absorbs carbon dioxide and prevents nocturnal pH drops in the main display.