IceCap EVO 2000 Water Pump
SKU: IC-EVO-2000
MSRP: $ 66,69
-
Available Through Authorized Retailer
- The IceCap EVO 2000 also comes in a higher-flow size, delivering up to 528 GPH for freshwater and marine tanks.
- It is built for hobbyists needing a return pump, reactor feed, or algae scrubber pump for mid-size setups.
- It runs on 30 watts, doubling the flow of the EVO 1000 while staying efficient for continuous operation.
- Its 6ft max head height gives it more reach for taller sump-to-display plumbing runs.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
A Higher-Flow Water Pump for Mid-Size Systems
The IceCap EVO 2000 steps up from the EVO 1000 with double the flow rate, still built to be compact, quiet, and energy-efficient for both freshwater and saltwater aquariums. It can be used as a return pump, to provide flow to a media reactor, to feed an algae scrubber, or for other general water-moving tasks in the system.
Delivering up to 528 GPH with 6ft of maximum head height, the EVO 2000 suits mid-size aquariums or applications with a taller plumbing run than the EVO 1000 can comfortably handle.
Key Features:
- Delivers up to 528 GPH of flow, double the EVO 1000
- Maximum head height of 6 ft
- Runs on 30 watts for efficient continuous operation
- Same compact 5 x 3.75 x 4.5in footprint as the EVO 1000
- 1/2–3/4in hose barb outlet fits standard aquarium plumbing
- Suitable for both freshwater and marine aquariums
Ideal For:
- Mid-size aquarium return pump applications
- Systems with a taller sump-to-display plumbing run
- Feeding a media reactor or algae scrubber that needs more flow than the EVO 1000 provides
Pro Tips:
- Match head height to your plumbing run. With a 6ft maximum head, the EVO 2000 handles taller vertical lifts better than the EVO 1000.
- Check your outlet size before plumbing in. The 1/2–3/4in hose barb outlet fits most standard tubing without extra adapters.
What’s Included:
(1) IceCap EVO 2000 AC Water Pump Unit
(1) Mounting Base Plate with Rubber Suction Feet (IP-EVO1000-BS)
(1) Stepped 1/2 in to 3/4 in Hose Barb Outlet Fitting
Technical Specs:
SKU / Factory Part Identifier: IC-EVO-2000
Maximum Flow Rate: 528 GPH
Maximum Head Height: 6.0 Feet
Power Consumption: 30 Watts
Operating Voltage: 110V AC / 60Hz
Dimensions (L x W x H): 5.0 in x 3.75 in x 4.5 in
Outlet Connection: 1/2 in to 3/4 in Hose Barb
Primary Compatibility: Freshwater & Saltwater Aquariums, Sumps, and Reactors
Warranty
CoralVue, Inc. hereby guarantees this product to be free from defects in material and workmanship for a period of:
- 1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
Installation & Set-Up Guidelines:
Attach the base plate with suction feet onto the bottom tracks of the EVO 2000 pump motor block.
Thread the stepped 1/2" – 3/4" hose barb fitting onto the pump discharge port.
Submerge the pump completely into your sump, rear filtration chamber, or water reservoir.
Push flexible vinyl tubing onto the hose barb fitting and secure it with a plastic ratchet hose clamp.
Plug the 110V AC power cord into an electrical outlet or power strip, creating a safety drip loop in the cord.
Pro Tips:
- Create a Power Cord Drip Loop. Because the EVO 2000 plugs directly into a standard 110V AC outlet, always ensure the power cord droops lower than the wall outlet. This prevents stray water droplets from traveling down the cord into the electrical socket.
- Soak in Vinegar During Routine Maintenance. Every 3 to 6 months, unplug the pump, remove the front cover and magnetic rotor, and soak them in warm white vinegar or citric acid solution. Clearing calcium and detritus prevents rotor drag and keeps operation quiet.