?unique=9ecd6e9)
Flipper Nano Stainless Steel Replacement (2pk)
SKU: FLP-BLNANO-SS
MSRP: $ 12.99
-
Available Through Authorized Retailer
- Marine-Grade Stainless Steel: Forged from premium, ultra-rigid stainless steel to cut through stubborn calcified coralline crusts without bending or warping.
- Universal Nano Platform Fit: Fully backwards-compatible with both the legacy Original Flipper Nano and the modern Flipper Nano Float magnetic cleaners.
- Glass Tank Protection Profile: Keeps a sharp, flat tracking line that peels away stubborn spot algae easily without risking panel scratches.
- Ultra-Low Profile Footprint: Form-fitted structural layout allows the blade to glide smoothly into tight, hard-to-reach areas around rockwork and corners.
- Value-Focused 2-Pack Collection: Arrives in a standard replacement card kit containing 2 individual metal blades to keep your maintenance station prepared.
- Fast Snap-Fit Tool-Free Changes: Low-profile slide-and-lock implementation lets hobbyists rotate or swap out dulled edges safely in under 10 seconds.
Flipper Cleaner
Flipper develops innovative aquarium products, such as the 2-in-1 magnetic algae scraper, designed to make owning and maintaining your tank more enjoyable.
Flipper Nano Stainless Steel Replacement Blades — 2 Pack (SKU: 252009)
The Flipper Nano Stainless Steel Replacement Blades (SKU: 252009 / UPC: 748252089410) are authentic, high-precision structural maintenance components distributed by CoralVue to preserve crystal-clear optical paths inside desktop nano reef tanks and small freshwater display aquariums. Over time, continuous contact with hard glass surfaces, dense calcified coralline algae, and green spot colonies will slowly round off and dull the leading edge of any scraper. Running a dull blade forces you to put more physical muscle into every pass and leaves annoying streaks behind. Keeping a fresh set of Nano stainless steel inserts loaded into your cleaner keeps your scraping efficiency high, slicing through hard deposits with half the effort.
The standout structural benefit of the 252009 design centers on its Low-Profile, High-Velocity Scrubbing Action. Measuring a compact 2-7/8" x 7/16", each blade snaps perfectly flat against the scraping deck of your compact Flipper Nano or Flipper Nano Float cleaner. This minimal footprint ensures the blade won't wobble or flex under the magnetic downforce required to pass through tanks up to 1/4" (6mm) thick. Formed explicitly out of a premium, salt-hardened marine steel matrix that resists corrosion, these blades deliver long-lasting performance on small-scale custom installations.
Key Features
Built and Rated Exclusively for Glass: Delivers exceptional scraping power on glass walls, cleanly removing hard crusts that plastic options struggle to lift.
Restores Factory Cleaning Performance: Instantly brings your magnetic cleaner back to its original efficiency line, reducing maintenance track times.
Keeps Sump and Pump Motors Safe: Traps moving calcified particles cleanly along the blade line rather than shattering them into loose shards that can jam pump impellers.
(Note: This retail package includes (2) individual Flipper Nano Stainless Steel Blades. The floating magnetic Flipper Nano main chassis body and plastic acrylic blades are sold under separate equipment categories).
Flipper Nano Replacement Blade Continuum
| Accessory Classification Scale | Material SKU Identifier | Total Pack Quantity | Intended Tank Material Base | Compatible Cleaner Chassis |
|---|---|---|---|---|
| Flipper Nano Stainless Steel | 252009 | 2 Blades per Pack | Hard Glass Panels Only | Original Nano & Nano Float Cleaner |
| Flipper Nano ABS Plastic | Contact for Availability | 2 Blades per Pack | Sensitive Acrylic Sheets | Original Nano & Nano Float Cleaner |
What’s Included:
(2) Flipper Nano Stainless Steel Glass Replacement Scraper Blades
Technical Specs:
Official Manufacturing Title: Flipper Nano Stainless Steel Blades (2 Pack)
SKU / Factory Part Identifier: 252009 (Alternative Distributor Reference: 209518 / UPC: 748252089410)
Total Unit Package Configuration: 2 Replacement Blades per Pack Box
Blade Structural Material: Marine-Grade Corrosion-Resistant Stainless Steel
Target Material Safety Threshold: Explicitly Optimized for Glass Aquariums Only (Not Safe for Acrylic)
Aquarium Wall Thickness Threshold: For Panels up to 1/4" Thick (6mm)
Actual Blade Dimensions: 2-7/8" L x 7/16" W (2.87in×0.43in)
Chassis Platform Compatibility: Form-Fitted for Flipper Nano and Flipper Nano Float Cleaners
- Disconnect your Flipper Nano internal wet module from the display glass and pull it safely out of the water column to change your blades on a clean, dry surface.
- Locate the side lifting tabs on the edge of the old blade. Gently lift up to release the blade from the tracking pins and slide it outward to discard it responsibly. Warning: Do not grab the raw sharp scraping edge during removal.
- Take a fresh stainless steel insert out of your 252009 box.
- Align the guide slots on the underside of the new blade with the matching pins on the Flipper Nano chassis head. Note: The structural design is directional and will only snap securely into place in one orientation.
- Push the blade firmly down and back until you hear a crisp click, indicating it is locked and seated evenly across the front profile of the scraper deck.
- Lower the loaded wet module back into your aquarium water, re-engage the external magnetic handle, and continue your routine aquarium maintenance.
Pro Tips:
- Never, Under Any Circumstances, Use These Metal Blades on Acrylic Aquariums. These marine-grade stainless steel blades are incredibly efficient at scraping hard algae off glass, but they should only be used on glass tanks. Acrylic panels are much softer than glass, and a metal blade will cause instant, deep scratches across the plastic. Always verify that your display setup is made of glass before using these replacement components.
- Replace Your Cleaning Inserts Every 3 to 6 Months. Even premium marine stainless steel will eventually lose its fine razor edge after months of scraping against hard glass and calcified coralline algae. If you notice your Flipper starting to leave thin streaks behind or requiring multiple passes over basic film algae, it's time for maintenance. Popping in a fresh blade from your 2-pack keeps it performing like new.
- Store Your Flipper in an Upper Corner to Keep the Blade Path Clear of Sand. When cleaning near your substrate sand line, always move slowly and check the scraper edge visually. If a piece of hard quartz sand gets caught between the blade edge and your glass, it can drag along and leave scratches. Storing your Flipper in an upper back corner of the tank when you're done helps prevent falling substrate debris from settling onto the cleaning pads.