IceCap Reverse Osmosis Booster Pump Power Supply
SKU: IP-RI-PS01
- Direct OEM Booster Fit: Factory-original replacement AC/DC power supply engineered specifically for the IceCap Smart RO/DI System and standalone IceCap Booster Pump Kits.
- Regulated 24V DC Output: Delivers steady, high-current 24-volt direct current to power positive-displacement booster pumps under continuous hydraulic loads.
- Integrated Safety Protections: Built-in safeguards against short circuits, thermal overload, and input voltage surges protect sensitive pump motor windings.
- Universal AC Input: Operates reliably across standard 100–240V AC (50/60 Hz) household outlets for broad electrical compatibility.
- Seamless Wiring Harness Integration: Pre-wired with the factory standard terminal interface to connect directly with IceCap pressure switches and booster pump harnesses.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
IceCap Reverse Osmosis Replacement Power Supply
Operating reverse osmosis booster pumps requires sustained, uninterrupted electrical power to build line pressure across dense TFC membrane sheets. The IceCap Reverse Osmosis Power Supply (SKU: IC-RI-PS01 / IP-RI-PS01) is the official OEM replacement 24V DC power adapter engineered specifically for IceCap Smart RO/DI Systems and IceCap Booster Pump assemblies.
Reverse osmosis booster pumps are high-torque motors that face varying electrical loads as water pressure shifts between low municipal feed rates and high backpressure shutoff points. Underpowered or unshielded generic transformers can drop voltage under heavy load, causing pump cavitation, overheating, or failure to trigger high-pressure cutoff switches. The IC-RI-PS01 provides regulated 24V DC power, ensuring the pump motor maintains the exact revolutions per minute needed to hit 65 to 85+ PSI operating pressure. Encased in a durable, heat-dissipating housing, it is built to handle prolonged multi-hour reservoir filling cycles.
Ideal Replacement Scenario
If your IceCap booster pump fails to spin, hums weakly without building membrane pressure, resets intermittently under load, or if the original transformer was damaged by moisture exposure or electrical line surges, installing an authentic IC-RI-PS01 restores reliable booster automation.
(Note: Package includes (1) IceCap Reverse Osmosis Replacement 24V DC Power Supply).
What’s Included:
(1) IceCap Reverse Osmosis Replacement Power Supply (IC-RI-PS01 / IP-RI-PS01)
Technical Specs:
SKU / Factory Part Identifier: IC-RI-PS01 (IP-RI-PS01)
Input Voltage: 100–240V AC, 50/60 Hz
Output Voltage: 24.0V DC
Output Current: 1.5A – 2.0A Regulated
AC Plug Type: Standard 2-Prong North American Type-A Wall Plug
Connector Type: Inline Polarized 2-Pin / DC Harness Connector
Housing Construction: Flame-Retardant Heavy-Duty Molded Polymer
Primary Compatibility: IceCap Smart RO/DI System (100 GPD), IceCap Booster Pump Kit, universal 24V DC reverse osmosis booster pump setups
Installation & Replacement Guidelines:
Unplug the existing damaged power supply from the wall outlet and disconnect the cold-water feed to the RO system.
Trace the power cord to the booster pump wire harness and unplug the inline DC electrical connector.
Inspect the wire harness connection ports to verify the contacts are clean, dry, and free of corrosion.
Connect the output lead of the new IC-RI-PS01 firmly into the booster pump / pressure switch harness until fully seated.
Form a downward drip loop with the power cable below the wall outlet level.
Plug the transformer into a GFCI-protected AC wall outlet or surge protector.
Turn on the feedwater supply and verify that the booster pump engages smoothly, raising system pressure on the pressure gauge to 65–85+ PSI.
Pro Tips:
- Mount Elevated and Away from Filter Housings. RO/DI systems operate in high-humidity laundry rooms, basements, or under-sink spaces where filter cartridge changes can cause accidental splashes. Always mount the IC-RI-PS01 power brick high on a wall or mounting board, well above the filter canister sumps and plumbing connections, to shield it from water contact.
- Always Connect to a GFCI Receptacle. Because reverse osmosis booster systems pair high line water pressure with 120V/240V AC power supplies, always plug the power adapter into a Ground Fault Circuit Interrupter (GFCI) outlet. This ensures immediate power cutoff if accidental water contact or splashing ever reaches the electrical connections.