63mm Metric Check Valve
SKU: PVC-CHKVLV-63
- Backflow Protection: Prevents water from siphoning back into the sump during power outages or pump maintenance.
- Commercial Sizing: Designed for 63mm metric PVC pipe (approx. 2.5" OD), common on Reef Octopus XP8000 and SRO8000 commercial series.
- High-Pressure Rating: Industrial-grade construction rated for pressures between 0.012 and 16 bar (0.17 to 232 psi).
- Industrial Strength: Offers a significantly more professional aesthetic and higher durability than standard white Schedule 40 PVC.
- Reliable One-Way Flow: Features a spring-loaded or weighted mechanism with EPDM seals for an airtight, non-return seal.
- Ideal For: Commercial protein skimmers; high-volume return pump outputs; large-scale exhibit plumbing.
63mm Metric Check Valve
The 63mm Metric Check Valve (Non-Return Valve) is a high-capacity safety component engineered for professional aquarium and industrial aquaculture installations. Precision-sized for 63mm Metric PVC pipe, this valve is a critical component in large-scale filtration, frequently utilized on the output and recirculating lines of industrial Reef Octopus skimmers such as the XP8000 and SRO series.
In large systems, the volume of water held in return plumbing can be immense. This check valve acts as a fail-safe, instantly stopping water from siphoning back into the sump if a pump fails or power is lost. This prevents sump overflows and ensures that your life support systems remain primed for an immediate, quiet restart once power is restored. Constructed from industrial-grade grey UPVC with an EPDM seal, it provides superior chemical resistance and longevity in both marine and freshwater environments.
Key Features
True Metric Calibration: Fits 63mm OD metric pipe—essential for maintaining factory Reef Octopus commercial equipment.
Low Opening Pressure: Engineered to open with as little as 0.17 psi (0.012 bar), maximizing the efficiency of your high-flow pumps.
Commercial Grade Durability: Rated for high-pressure systems up to 232 psi (16 bar), far exceeding standard residential plumbing limits.
Corrosion Resistant: 100% saltwater safe and chemically inert; will not rust or degrade in harsh reef conditions.
Socket-Style Connection: Deep slip-fit sockets ensure a massive surface area for a secure, permanent solvent weld.
Ideal For
Industrial Return Manifolds: The primary safety device for massive display tanks and public exhibits.
Commercial Skimmer Assemblies: Protecting large-body Reef Octopus skimmers from drainage during maintenance.
Centralized Filtration: Managing one-way flow in complex aquaculture racks and multi-pump systems.
Images shown are representative of the product family. Materials, sizes, and configurations may vary.
What’s Included:
(1) 63mm Metric PVC Check Valve
Specifications:
Size: 63mm
Connection Type: Slip x Slip (Socket)
Body Material: High-grade UPVC
Seal Material: EPDM
Pressure Rating: 0.012 – 16 bar (0.17 – 232 psi)
Compatibility: 63mm Metric Pipe ONLY
- Locate the flow direction arrow on the valve body; it must point toward the aquarium or intended direction of flow.
- Ensure the 63mm metric pipe is cut perfectly square and thoroughly deburred to prevent damage to the EPDM seals.
- Perform a dry-fit of the valve in your plumbing run to ensure it is accessible for periodic inspection.
- Apply PVC primer and a heavy-duty solvent cement to both the pipe end and the valve socket.
- Insert the pipe firmly and hold for 45–60 seconds to ensure a secure, permanent bond.
Pro Tips:
- For the most reliable seal, install the valve in a vertical position (upward flow) so gravity assists the internal sealing mechanism.
- Metric vs. Standard 2.5-Inch. A 63mm metric fitting will not fit standard 2-inch or 2.5-inch USA pipe. 63mm is a specific metric outer diameter (approximately 2.48 inches). Always measure your pipe with a caliper to ensure you are working with metric components before applying adhesive.
- Maintenance Schedule. In large-scale marine environments, calcium carbonate or small organisms like tube worms can prevent a check valve from sealing perfectly. We recommend inspecting the valve every 6–12 months to ensure the internal mechanism and EPDM seal are free of obstructions.
- Industrial Aesthetic. Use clear PVC primer instead of purple to maintain the professional, factory look of the grey UPVC. This matches the professional aesthetic of high-end commercial Reef Octopus systems for a clean, industrial-grade installation.