Reef Endurance Bulk Soda Ash, 25 lbs
SKU: RE-SDASH-XL
- Bulk Pharmaceutical-based Soda Ash that mixes crystal clear with no unwanted impurities.
- Use to replenish and maintain Alkalinity levels in a reef aquarium without impacting pH.
Reef Endurance
A line of pharmaceutical-grade aquarium supplements and filtration media.
Pharmaceutical-Grade Soda Ash Aquarium Supplement
Reef Endurance Soda Ash is a Pharmaceutical-based reef aquarium supplement that mixes crystal clear with no unwanted impurities. Maintaining alkalinity within a range of 8.0-12.0dKH in reef aquaria will enable corals and other reef-building invertebrates to grow correctly. For best results, use in conjunction with Reef Endurance Calcium Carbonate as a two-part solution.
Key Features:
- Replenish and maintain Alkalinity levels in a reef aquarium
- It doesn't impact pH
- Resealable Packaging
- Mixes Clear
- No Residue
- Easy 2-Part Dosing
While most of our equipment carries a one-year manufacturer's warranty, consumable products like fish and coral foods are not covered under traditional warranty terms due to their perishable nature and varied storage conditions. However, we fully stand behind the quality of every product we sell. If you experience any issues with your food purchase shortly after receiving it, such as concerns about freshness, packaging integrity, or product quality, please contact us at [email protected]. We're committed to making it right and will work with you to resolve any problems quickly and fairly.
Mixing Stock Solution Instructions:
1 gal RO/DI + 375 grams (about 1 cup) of Soda Ash will create a solution with an alkalinity level of ~1.87 meq/L.
- Fill a one-gallon container half full of RO/DI or distilled water
- Add 375 grams (about 1 cup) of Soda Ash to the container.
- Top off to the 1-gallon mark.
- Secure the cap, shake the solution vigorously, and allow it to dissolve for 24 hours.
Dosing Instructions:
46.4 mL of Soda Ash stock solution will increase alkalinity by approximately 1 dKH in 65 USG. It is not recommended to raise alkalinity by more than 1dKH per day.
Tip: If you have issues raising your alkalinity levels, ensure your aquarium magnesium level is between 1200 and 1350 ppm.