Octo VarioS 10 Pump Controller Mount
SKU: ROP-VAR10-CM
- Genuine OEM Direct Replacement: Authentic factory-spec electronic driver mounting bracket engineered specifically for the large-format Reef Octopus VarioS-10 smart controller module.
- Slotted Aluminum Heat-Sink Backing: Formed from commercial-grade, anodized aluminum that acts as an external thermal pathway to help pull ambient heat away from internal microprocessors.
- Secure Slide-and-Lock Fitment: Precision-cut guide tracking allows the heavy-duty 36V control module to slide down smoothly and anchor rigidly against walls or panels.
- Organized Control Board Layout: Elevates your primary pump driver off damp surfaces, isolating electronic input terminals from accidental water splashes and pooling hazards.
- Pre-Drilled Anchor Eyelets: Features reinforced structural mounting holes to easily secure your line infrastructure onto wood control boards, cabinet walls, or drywall.
- Corrosion-Proof Structural Finish: Coated with a marine-grade black anodization layer that prevents pitting, oxidative wear, and degradation in high-humidity equipment rooms.
Reef Octopus
Globally trusted for premium protein skimmers and pumps, engineered in-house for unmatched reef filtration performance.
Reef Octopus VarioS-10 Pump Controller Mounting Bracket (ROP-VAR10-CTRLM)
The Reef Octopus VarioS-10 Pump Controller Mounting Bracket (SKU: ROP-VAR10-CTRLM) is an authentic factory-spec hardware containment accessory distributed by CoralVue to optimize the layout, safety, and operational longevity of your aquarium's central control hub. The flagship VarioS-10 pump requires an advanced, high-amperage 36-volt controller to manage its 200-watt variable speed brushless motor block. Because this industrial-tier driver works continuously to regulate massive fluid turnover, the internal computer chips generate localized electronic heat that must be consistently radiated away into the surrounding atmosphere to prevent performance thermal-throttling.
Leaving an expensive smart controller resting loose on top of a cabinet shelf or hanging awkwardly by its heavy-gauge motor cords is a serious system hazard. Cable strain can compromise internal wire solder tracks, and it positions vulnerable digital touchpads directly in the line of accidental salt spray or filter overflow splashes. This specialized structural backing plate screws permanently to your dry equipment board, allowing the VarioS-10 controller block to slide vertically and lock flush into an unyielding mount. The thick aluminum track serves as an active heat-sink array, lowering operational temperatures while beautifully organizing your wiring matrix to preserve a clean, professional reef profile.
Key Features
True VarioS-10 Geometric Profile: Specifically stamped and cut to align seamlessly with the native slide-mount slots built directly into the rear housing of the factory VarioS-10 controller block.
High-Strength Anodized Metal Composite: Rigid aluminum core easily resists continuous structural bowing, heavy cable strain, and physical impacts.
Passive Thermal Exchange Engineering: Maximizes external airflow circulation behind the module housing, keeping internal capacitor banks running within safe baseline limits.
Flush-Seating Screw Flanges: Machined screw channels allow mounting hardware to sink completely level, avoiding raised obstructions that would block the controller from sliding smoothly into place.
Verified Hardware Compatibility
Reef Octopus VarioS Pump Infrastructure: Engineered explicitly as the native matching wall-mounting bracket array for the flagship Reef Octopus VarioS-10 Controllable Circulation Pump Controller module.
(Note: This bracket is scaled to match the oversized industrial housing profile unique to the 36V VarioS-10 system. Smaller 24V pump models, such as the VarioS 2, 4, 6, or 8 controllers, utilize standard plastic cradles and require different model-specific replacement brackets).
What’s Included:
(1) Reef Octopus Replacement VarioS-10 Form-Fitted Aluminum Controller Mounting Bracket Plate
(Note: Wall/board attachment screws, digital smart controllers, waterproof motor cables, and power conversion blocks are sold separately).
Technical Specs:
Official Manufacturing Title: Reef Octopus VarioS-10 Pump Controller Mount
SKU / Factory Part Identifier: ROP-VAR10-CTRLM
Material Composition: Heavy-Duty Marine-Grade Anodized Structural Aluminum
Mounting Interface Type: Flush-Fit Vertical Slide-and-Lock Track Matrix
Primary Function: Controller Stabilization, Cable Strain Isolation, & Passive Heat Dissipation
- Disconnect the primary power supply brick from your VarioS-10 controller to eliminate live electricity before modifying your equipment board layout.
- Select a completely dry cabinet board, external equipment panel, or wall workspace situated entirely clear of open water lines, plumbing joints, or unvented sump humidity.
- Place the ROP-VAR10-CTRLM bracket flat against your choice of surface, checking with a bubble level to ensure the vertical slide alignment tracking is straight.
- Drive appropriate mounting screws securely through the pre-drilled flush eyelets until the metal mounting plate is locked perfectly rigid against the board.
- Take your dry VarioS-10 controller module, align the rear structural slider grooves over the top of the mounted metal tracks, and slide it down smoothly until it locks at its resting base.
- Neatly bundle your heavy-gauge incoming 36V power line and outgoing motor cables below the bracket with zip ties to eliminate line strain, then restore main power.
Pro Tips:
- Always Mount the Bracket Completely Outside of Your Sump Cabinet. Even though this mount is made of premium anodized aluminum, it is designed to hold an advanced electronic computer module. Never mount this assembly inside an enclosed, unvented sump cabinet where bubbling saltwater spray, salt creep crust, and high evaporation fill the air. Mount the bracket on an external dry control panel to protect your expensive controller from moisture-driven internal circuit board corrosion.
- Maintain a Clear Airspace Boundary Around the Plate. Because the heavy-duty 36V VarioS-10 controller handles substantial power throughput to run your return manifold, the rear aluminum bracket works actively to draw warmth away from the unit. Avoid packing other high-heat electronic components—such as large LED light ballasts, secondary inline heater controllers, or heavy multi-outlet power strips—directly flush against this bracket. Leaving 2 inches of open airspace all the way around allows for clean, un-stifled passive convection cooling.
- Utilize Proper Cable Drip Loops Below the Controller. When sliding your controller onto the newly installed mount, verify that the heavy cords exiting the bottom connections loop down toward the floor before tracking back up to your power strip. This configuration creates a vital safety "drip loop." If an unexpected pipe leak or condensation trail ever tracks along the power cables, gravity will force the liquid to pool and drip harmlessly off the bottom of the loop instead of guiding the water straight into your electrical socket pins.