IceCap Kalkwasser Mixing Reactor Power Supply
SKU: IP-KM-PSU
Universal IceCap KM Series Compatibility: Factory-original OEM replacement power supply engineered for the motorized bases of IceCap KM-120, KM-150, and KM-200 Kalkwasser Mixing Reactors.
Controlled DC Motor Output: Delivers steady, regulated DC power to the base motor for smooth magnetic stir bar rotation and reliable calcium hydroxide saturation.
Integrated Speed Regulation Support: Delivers clean voltage compatible with the motorized drive's adjustable speed dial to maintain a gentle, controlled slurry roll without violent vortexing.
Built-in Circuit Protection: Protects sensitive internal drive motor circuitry from line surges, over-current, and electrical fluctuations common in aquarium cabinetry.
Simple Plug-and-Play Setup: Standard barrel connector plugs directly into the reactor motor base without wiring, soldering, or complicated configuration.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
IceCap Kalkwasser Mixing Reactor Power Supply
Reliable power delivery is essential for maintaining consistent limewater saturation in reef aquarium dosing systems. The IceCap Kalkwasser Mixing Reactor Power Supply (SKU: IP-KM-PSU) is the official OEM replacement AC/DC power adapter engineered specifically for the entire IceCap KM Series Kalkwasser Mixing Reactors, including the KM-120, KM-150, and KM-200.
Because aquarium cabinet environments subject equipment to high humidity, corrosive salt creep, and line surges, power adapters can degrade over time. A failing power supply can cause the external motorized drive to stall, spin erratically, or fail to power on entirely, preventing the magnetic stir bar from agitating calcium hydroxide powder. Replacing an aging or damaged adapter with the authentic IP-KM-PSU restores regulated power to the motorized base, ensuring smooth, quiet stir bar rotation and properly saturated kalkwasser effluent for your automated top-off or dosing regimen.
Ideal Replacement Scenario
If your IceCap Kalk Mixer drive base fails to spin, runs intermittently, hums without turning the magnetic stirrer, or if the original transformer was damaged by an accidental splash or surge, installing the OEM IP-KM-PSU power supply restores complete operational control.
(Note: Package includes (1) IceCap Kalkwasser Mixing Reactor Replacement Power Supply Adapter).
Key Features:
- Genuine OEM part; engineered to match the exact power requirements of the IceCap mixer motor
- Compatible with all IceCap Kalk Mixing Reactor sizes (Small IC-KM-120, Medium IC-KM-150, Large IC-KM-200)
- Restores full reactor operation without requiring a full unit replacement
What’s Included:
(1) IceCap Kalkwasser Mixing Reactor Replacement Power Supply (IP-KM-PSU)
Technical Specs:
SKU / Factory Part Identifier: IP-KM-PSU
Input Voltage: Universal 100–240V AC, 50/60Hz
Output Connector: Standard Molded DC Barrel Plug
Color: OEM Matte Black
Primary Compatibility: IceCap KM-120, KM-150, and KM-200 Magnetic Kalkwasser Mixing Reactors
Installation & Replacement Guidelines:
Disconnect the old or non-functioning power supply from the wall outlet or power strip.
Unplug the DC barrel plug from the power input jack on the IceCap Kalk Mixer motorized base.
Insert the DC barrel plug of the new IP-KM-PSU securely into the reactor base power socket.
Plug the AC adapter into an electrical outlet, ensuring the cord forms a drip loop below the socket.
Power on the mixer motor and adjust the speed dial to verify that the magnetic stir bar rotates smoothly and silently.
Pro Tips:
- Always Form a Drip Loop. When installing the power adapter near aquarium equipment or under a stand, arrange the cord so it dips below the wall receptacle before rising to plug in. This prevents any moisture or stray drips from traveling down the wire into the electrical outlet.
- Automate Mixing Cycles with a Dedicated Timer. IceCap Kalk Mixer motors are engineered for intermittent rather than continuous 24/7 operation. Plug the IP-KM-PSU into an aquarium controller or smart outlet programmed to run for 5 to 10 minutes, 3 to 4 times daily, timed shortly before or between dosing events to keep the solution fully saturated without premature motor wear.