HYDROS Triple Optical Level Sensor
SKU: HDRS-LS3
MSRP: $ 48,50
-
Available Through Authorized Retailer
HYDROS Sense Port Accessory
The HYDROS Triple Optical Water Level Sensor uses three optical sensors to measure aquarium or ATO reservoir water levels accurately without contact. It has three separate optical sensors, providing more precise and accurate readings at different water levels. The device plugs into any Sense Port on a HYDROS device and does not require additional power.
User Instructions
HYDROS
USA-built aquarium automation system that monitors & controls equipment from an intuitive app.
3 Water Level Sensors for Added Redundancy
The HYDROS Triple Optical Water Level Sensor can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or detecting when a dosing container needs a refill. It plugs into any Sense Port on a HYDROS device (like the Control XS, X2, X4, X10, etc.) and does not require any additional power source.
The HYDROS Water Level Sensor contains no moving parts that can fail. The optical eye is magnetically coupled with the magnet side measuring only ¼” thick. It can be mounted to most clear, tinted, or painted surfaces up to ½” thick. The sensor operates in the daytime or complete darkness so it’s safe for use hidden inside your aquarium stand or in the back chambers of an all-in-one aquarium. The sensors are easy to place, easy to move, and easy to clean.
3 Sensor Operation
When the water level in the sump or aquarium drops below the LOW LEVEL (3) on the sensor, it will fill the water till it reaches NORMAL LEVEL (2).
SAFETY LEVEL SENSOR (1) is a backup to shut down the feed pump in case of a malfunction; in this case, an alarm can be triggered.
Click Here for User Instructions
Compatibility
Compatible with any HYDROS Controller with a green Sense port.
HYDROS Triple Level Sensor Specs:
Dimensions
Sensor diameter: 0.75 in
Sensor thickness: 0.75 in
Magnet mount thickness: 0.25 in
Installation
Maximum mounting thickness: 0.5 in
Cord length: 75 in
Magnetic attachment
Compatibility
Suitable for freshwater and saltwater aquariums
Design & Protection
GX12 aviation-style connector maintains the Control’s IP65 rating (dust-tight and protected against water spray at any angle)
WARRANTY
CoralVue, Inc. hereby guarantees this product to be free from defects in material and workmanship for a period of:
- One (1) year warranty on the device body/housing
- One (1) year warranty on dosing pump motor (not dosing head(s))
- Tubing, head rollers, and head bushings are considered wearable parts because they experience regular friction, pressure, and use over time, leading to natural degradation. Since these components are expected to wear out during normal operation, they are not covered under the limited warranty.
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse, or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of the owner's or his agent's first knowledge of the defect.
- That CoralVue, Inc. shall be given the first opportunity to make any repairs, replacements, or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary, or consequential damages of any nature, however arising out of the use or inability to use because of the product defect.