Octo Bubble Blaster 3000 Skimmer Pump
SKU: HY-3000S
- Pull more air per gallon for more aggressive, effective skimming.
- Digital control board manages startup, RPM, and shuts off on fault.
- Clear volute housing lets you spot clogs without disassembly.
- Direct fit for protein skimmer models: CLSC-200INT, SRO-3000, and XP-3000, no adapter needed.
Reef Octopus
Globally trusted for premium protein skimmers and pumps, engineered in-house for unmatched reef filtration performance.
Reef Octopus Bubble Blaster HY-3000 Skimmer Pump
Most skimmer pumps on the market are standard water pumps retrofitted with a modified impeller to draw in and chop air. The Bubble Blaster HY-3000 was built from the ground up as a dedicated skimmer pump, engineered around pulling the largest possible volume of air relative to water flow — the key to aggressive, effective protein skimming.
A digital control circuit board manages directional start-up and RPM speed, and shuts the pump down automatically if it detects a fault, protecting the motor from damage. The clear volute housing lets you see inside the pump without taking it apart, so a clog or obstruction is visible at a glance instead of requiring a teardown.
Key Features:
- Purpose-built air-shredding design, not a modified water pump
- Digital control board for directional start-up and RPM management
- Automatic shutoff on fault detection to protect the motor
- Clear volute housing for at-a-glance internal inspection
- Direct fit for CLSC-200INT, SRO-3000 INT/EXT/SSS, and XP-3000 INT/EXT/SSS, no adapter required
- Max flow: 425 GPH
- Max air draw: 1100 L/H (39 SCFH)
- Power consumption: 40 watts
Ideal For:
- Direct replacement pump for Reef Octopus CLSC-200INT, SRO-3000, and XP-3000 skimmers
- Hobbyists looking to restore or boost skimming performance on this skimmer size
- Anyone stepping up from the HY-2000 for a larger skimmer body
What's Included:
- One Bubble Blaster HY-3000 skimmer pump
Specifications:
- SKU: HY-3000S
- Max Flow: 425 GPH
- Max Air: 1100 L/H (39 SCFH)
- Power Consumption: 40 watts
- Dimensions: 205 x 155 x 125mm
- Compatible with Protein Skimmer models (no adapter needed): CLSC-200INT, SRO-3000 INT/EXT/SSS, XP-3000 INT/EXT/SSS
WARRANTY
CoralVue, Inc. and Reef Octopus hereby guarantee this product to be free from defects in material and workmanship for a period of:
- Five (5) year warranty on pump body/housing
- Three (3) year warranty on Reef Octopus-branded controller
- One (1) year warranty on Power Supply, Impeller (and components), Rotor, Rear Bushing, and Gaskets
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.