IceCap Skimmer Stand, Large, 11x9in
SKU: IC-SRS-2823
MSRP: $ 41,57
-
Available Through Authorized Retailer
- 6 Variable Height Settings: Features a unique, interlocking geometric dual-direction peg system providing 6 selectable resting heights ranging from 4 to 6.25 inches.
- Massive 11" x 9" Surface Area: Heavy-duty, broad acrylic platform handles large-format in-sump skimmers or media reactors up to 11 inches in length.
- Passive Vibration Isolation Design: Thick cell-cast acrylic legs act as a natural dampener, absorbing low-frequency pump vibration to minimize under-cabinet noise.
- Advanced Multi-Directional Drainage: Designed with an open-plate framework that promotes healthy under-stand water exchange, preventing dead zones and detritus collection.
- Completely Tool-Free Adjustment: Uses a modular slide-and-lock leg interface, allowing you to reconfigure operational heights in seconds without any hardware.
- Marine Grade Chemical Resistance: Crafted entirely out of thick, transparent cell-cast acrylic sheets that will never leach, corrode, or degrade in high-salinity marine sumps.
IceCap
Premium aquarium equipment without the premium price. Protein skimmers, pumps, reactors, heaters & more.
IceCap Large Adjustable Skimmer Stand 11x9in — (IC-SRS-2823)
The IceCap Large Adjustable Skimmer Stand (SKU: IC-SRS-2823) is an authentic, heavy-duty modular sump accessory distributed by CoralVue to simplify water level tuning in marine and freshwater filtration setups. Most modern in-sump protein skimmers require a very specific operational water depth—typically between 6 and 9 inches—to maintain the correct internal air-to-water pressure matrix. If your sump`s filtration compartment runs deeper than your skimmer's target baseline, the internal column pressure spikes, causing the collection cup to overflow with clean water. The IceCap Large Skimmer Stand solves this placement problem entirely, providing a solid, stable elevated platform to keep your skimming line right at the water surface.
Constructed from heavy-gauge, water-clear cell-cast acrylic, the Large 11x9 stand avoids the structural collapse or micro-fracturing common with cheaper molded plastic shelves. Its primary innovation is its Dual-Directional Flippable Leg Geometry. By shifting or flipping the modular support legs, you can adjust the platform height across six distinct intervals: 4.0", 4.5", 4.75", 5.0", 5.75", and 6.25". The stand also features an open, multi-slotted support plate that allows incoming water currents from your drain line to flow freely beneath the platform. This stops organic detritus, fish wastes, and decaying debris from settling into anaerobic bacterial muck traps beneath your heavy equipment.
Key Features
Prevents Unexpected Sump Flooding: Eliminates the primary cause of sudden protein skimmer overflows by adjusting your hardware straight into the manufacturer`s recommended depth.
Absorbs Low-Frequency Pump Hum: Dense acrylic tracking isolates high-velocity needlewheel motor resonance, dampening low-frequency resonance against the glass sump panel.
Zero-Metal, Eco-Safe Assembly: Uses a hardware-free locking layout with no metal screws, springs, or metallic rods, eliminating rust risks in saltwater environments.
(Note: This retail box contains (1) 11" x 9" clear acrylic skimmer platform plate and (2) modular interlocking height adjustment leg panels. Protein skimmers, sumps, and silicone dampening mats are sold under separate product categories).
IceCap Adjustable Skimmer Stand Sizing Matrix
| Model Variant Class | Manufacturing SKU | Platform Dimensions | Target Skimmer Sizing | Available Height Intervals |
|---|---|---|---|---|
| IceCap Small Stand | IC-SRS-1815 | 7.0" x 6.0" | Nano & Micro Skimmers | 3.0" / 3.25" / 3.7" / 4.0" / 4.5" |
| IceCap Medium Stand | IC-SRS-2318 | 9.0" x 7.0" | Mid-Sized In-Sump Skimmers | 3.0" / 3.5" / 3.75" / 4.0" / 4.5" |
| IceCap Large Stand | IC-SRS-2823 | 11.0" x 9.0" | Large-Format Heavy Skimmers | 4.0" / 4.5" / 4.75" / 5.0" / 5.75" / 6.25" |
What’s Included:
(1) IceCap Large 11" x 9" Precision-Slotted Acrylic Resting Plate
(2) Multi-Height Interlocking Reversible Acrylic Leg Support Panels
Technical Specs:
Official Manufacturing Title: IceCap Large Adjustable Skimmer Stand
SKU / Factory Part Identifier: IC-SRS-2823
Primary System Application: Submerged In-Sump Lifter Platform
Platform Footprint Dimensions: 11.0" x 9.0" (11in×9in)
Primary Material Structural Gauge: Heavy-Duty Clear Cell-Cast Acrylic
Total Number of Selectable Heights: 6 Heights
Selectable Height Matrix: 4.0", 4.5", 4.75", 5.0", 5.75", and 6.25"
Maximum Structural Weight Capacity: Supports up to 45 lbs safely (45lbs)
Warranty
CoralVue, Inc. hereby guarantees this product to be free from defects in material and workmanship for a period of:
- 1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
- Unbox the platform plate and leg panels. Remove any protective protective plastic masking film from the clear acrylic sheets before assembly.
- Review your protein skimmer's manual to find its recommended operating depth. Measure the current depth of your sump water chamber. Subtract the target skimmer depth from your sump water height to determine the necessary lift.
- Select your height on the leg panel tracking. For lower range increments (4.0", 4.5", or 5.75"), orient the legs with the lower tab baseline pointing upward. For higher range elevations (4.75", 5.0", or 6.25"), flip the leg panels 180 degrees.
- Align the male tabs of the legs with the corresponding slotted receiver lines beneath the main 11x9 plate. Slide the parts together until they click into place.
- Lower the assembled stand into your sump partition, verifying it sits completely flat on the bottom glass panel without wobbling.
- Place your internal protein skimmer squarely onto the center of the stand platform. Re-verify that the skimmer's pump intake screen remains fully submerged beneath the water surface before starting up the motor.
Pro Tips:
- Always Re-Verify That the Sump Intake Chamber Does Not Run Dry. When using the maximum 6.25-inch height extension on the IC-SRS-2823 stand, you are lifting the skimmer pump inlet significantly higher in the sump water column. Ensure that your automated Auto Top-Off (ATO) water sensors are positioned properly. If evaporation drops the sump level lower than normal, a heavily elevated pump can pull air from the surface, causing the motor to run dry and overheat.
- Add a Dot of Silicone Adhesive Under the Feet for Ultra-Quiet Sumps. The thick cell-cast acrylic construction does a great job of suppressing motor resonance on its own. However, if your sump base has a slight manufacturing ripple, hard plastic sitting directly on glass can sometimes create an elusive micro-rattle. To ensure total silence, apply a small dot of aquarium-safe 100% silicone adhesive underneath the base edges of each leg pad, let it cure fully, and place it back in—the rubber feet act as an additional vibration isolation pad.
- Give the Under-Stand Area a Quick Blast with a Turkey Baster Weekly. While the open-slotted architecture of the 11x9 plate drastically improves water exchange compared to solid plastic blocks, heavy organic debris can still settle beneath the stand in slow-moving corners. During your weekly reef maintenance routine, use a simple aquarium siphon or a turkey baster to quickly blow water under the platform. This kicks up trapped solids so your mechanical filters or skimmer can export them before they break down.