%20?unique=9ecd6e9)
Octo Lux Aquarium Cabinet Hinges Black (1 Set)
SKU: ROP-DRHG-B
- 100% Genuine OEM Factory Part: Manufactured directly by Reef Octopus to serve as a precise, identical structural swap for sagged or worn-out cabinet stand hinges.
- Unified Upper & Lower Match Set: Arrives as a complete door restoration loop containing (1) dedicated upper hinge and (1) dedicated lower hinge bracket.
- Patented Non-Corrosive Nylon Body: Forged from a dense, salt-air impervious nylon composite matrix that completely shields your system against unsightly rust bleed tracking.
- True 180-Degree Pivot Swing: Engineered to permit a full wide-angle door extension, granting unhindered physical clearance during intensive sump filter maintenance.
- Treated Internal Components: Features high-grade treated stainless steel pivot elements to provide smooth, silent operation in high-moisture sump cabinet interiors.
Reef Octopus
Globally trusted for premium protein skimmers and pumps, engineered in-house for unmatched reef filtration performance.
Reef Octopus Octo Lux Cabinet Replacement Door Hinges - Black
The Reef Octopus Octo Lux Cabinet Replacement Door Hinges in Black (SKU: ROP-DRHG-B) are authentic structural OEM hardware components distributed by CoralVue to protect the beauty and structural integrity of luxury marine aquarium furniture. Sump cabinets house the heart of a reef tank's filtration loop, continuously enclosing high-volume protein skimmers, open water baffles, and turbulent return pump lines. This localized environment creates non-stop humidity and fine salt mist. Traditional household zinc or chrome-plated metal hinges will rapidly degrade under these conditions, oxidizing into an orange rust slurry that seizes the joints and permanently stains high-gloss laminated MDF paneling. This patented polymer hardware loop completely neutralizes salt-air degradation, providing a durable connection that preserves smooth door movement over the lifespan of your system.
Engineered with custom frame tracks, the ROP-DRHG-B pack serves as the direct factory-correct hardware update for the Reef Octopus Octo Lux Aquarium Tank Systems (Lux Classic T60 & T90 sets) featuring gloss black cabinet finishes. The kit arrives containing one upper and one lower hinge bracket to fully restore a single cabinet door pane. Boasting an ultra-fluid 180-degree swing layout, it allows the cabinet doors to pull back flat against the exterior sides of the stand frame. This broad clearance lets operators easily slide out wide PVC or acrylic sump basins, swap out heavy filter sock arrays, or service internal reactor setups without wrestling with swinging doors or restricted workspace access.
Key Features:
Absolute Rust-Proof Security: Patented engineered nylon architecture entirely prevents structural crumbling and chemical oxidation tracks within moisture-heavy sump compartments.
Flawless 180-Degree Accessibility: Maximizes your physical maintenance workspace, letting you swing doors wide open to gain access to plumbing paths and wire hubs.
Silent, Ergonomic Door Trailing: Incorporates factory-lubricated pivot housings to eliminate squeaking and misalignment, keeping heavy laminated cabinet doors level.
Note: This retail SKU contains (1) complete set including one upper and one lower black nylon hinge assembly. Gloss black MDF cabinet stands, clear low-iron rimless glass aquariums, PVC sumps, and internal plumbing unions are sold under separate product categories.
What’s Included:
(1) Reef Octopus Octo Lux Patented Nylon Upper Cabinet Door Hinge Assembly (Black)
(1) Reef Octopus Octo Lux Patented Nylon Lower Cabinet Door Hinge Assembly (Black)
Technical Specs:
Official Manufacturing Title: Reef Octopus Octo Lux Tank Hinges, Black
SKU / Factory Part Identifier: ROP-DRHG-B
Primary Shell Color Finish: Sleek Gloss Cabinet Black
Structural Hardware Composition: High-Density Marine Injection-Molded Nylon & Anti-Friction Compounds
Maximum Mechanical Pivot Swing: 180-Degree Full-Extension Radial Arc Range
System Furniture Compatibility: Custom Form-Fitted for Reef Octopus Lux Classic 60 and Lux Classic 90 Cabinet Frame Layouts
WARRANTY
CoralVue, Inc. hereby guarantee this product to be free from defects in material and workmanship for a period of:
- 90days
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse, or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of the owner's or his agent's first knowledge of the defect.
- That CoralVue, Inc. shall be given the first opportunity to make any repairs, replacements, or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary, or consequential damages of any nature, however arising out of the use or inability to use because of the product defect.
Click here to learn more.
Instructions:
- Turn off your primary return pump and filtration equipment if you need to completely clear out the inside of the cabinet to access the hinge attachment points.
- Support the weight of the gloss black cabinet door panel from below, then use a screwdriver to remove the screws holding the old, sagging hinges to the interior cabinet walls. Pull the door panel entirely away from the stand frame.
- Unthread the worn hinge brackets from the rear mounting pockets on the inside face of the door panel and discard the broken hardware blocks.
- Wipe down the pre-drilled hinge pockets on both the door panel and the inner wall with a dry cloth to clear away any accumulated dust, dried salt spray, or organic wood residue.
- Take your fresh ROP-DRHG-B black nylon hinge set and press the upper and lower modules firmly into their corresponding door tracks. Secure them tightly using your mounting screws.
- Lift the door pane back up to the cabinet frame, align the hinge arms with the pre-drilled pilot holes on the interior cabinet wall panel, and thread the mounting screws home. Check the door alignment and adjust as needed to ensure it hangs level and flush.
Pro Tips:
- Never Skip Adjusting the Integrated Alignment Screws for a Flush Cabinet Face. Because the Octo Lux series features an immaculate, contemporary minimalist design with clean, handle-free glossy doors, even a tiny millimeter fraction of sag or tilt will cause the cabinet front to look noticeably uneven. After mounting your fresh ROP-DRHG-B black hinges to the interior wall, do not just slam the door shut. Use a manual screwdriver on the integrated adjustment tracking screws built into the hinge arm. Turning these screws allows you to micro-adjust the door panel left, right, forward, or backward, letting you align the panels perfectly for a clean, professional finish.
- Hand-Tighten Screws Only to Prevent Stripping Soft Cabinet MDF Walls. The premium Octo Lux cabinet stand frame is constructed out of high-density Medium Density Fiberboard (MDF) covered in a multi-layered glossy water-resistant paint coating. While this material provides immense strength against heavy water loads, it can easily strip out if subjected to brute force. Never use an electric drill or power driver to sink the mounting screws into the cabinet wall slots. The high torque from a power tool can instantly chew up the soft wood fibers, leaving the hole stripped out and unable to hold the hinge securely. Always use a manual hand screwdriver to safely lock the threads down.
- Wipe Away Accumulating Sump Cabinet Condensation Bi-Weekly. Even though these genuine replacement hinges are molded from a high-purity, patented marine nylon weave specifically designed to completely eliminate rust, salt creep and condensation can still leave a thick, crusty mineral residue over the moving pivot points if left unmanaged. If heavy salt creep builds up inside the hinge joints for months, it will dry into a solid block of scale that physically jams the tracking lines, causing the door to bind or stress the nylon arms when forced open. Make it a simple habit during your bi-weekly filter check to wipe down the surface of the hinges with a damp cloth to keep them clean and moving smoothly.