IceCap Red Jasper Stone, 44lbs

1. Unbox the 44lb case in a well-ventilated area or over a drop cloth. Lay out all the individual Red Jasper segments to review their sizes, color variations, and natural fault-line faces.
2. Use a stiff-bristled brush to thoroughly scrub the surfaces of each stone under running tap water. This clears away fine mineral dust and transit grit trapped in the stone's fissures. Warning: Never wash aquascaping rocks with bleach, household dish soaps, or chemical surface cleaners.
3. Test your design outside the aquarium first. Arrange your pieces on a flat surface or within a cardboard box cut to your tank's exact footprint to experiment with layouts safely.
4. When placing these heavy boulders inside your glass tank, ensure they rest securely. Place a thin plastic grid spacer (like eggcrate) or a shallow layer of sand beneath large stones to distribute their weight evenly and protect the bottom glass from targeted pressure cracks.
5. Stack the interlocking stones carefully. Use specialized aquarium-safe epoxy or cyanoacrylate gel at the contact points to lock complex mountain peaks or high arches in place.
6. Slowly fill your aquarium with water. Direct the stream onto a plate or plastic wrap to avoid disturbing your sand bed or blowing substrate dust over the polished faces of your Jasper stones.

Pro Tips:

• Utilize the Quartz Veins to Define Flow and Direction in Your Aquascape. When sorting through your IC-WRJS-44 case, you will notice that several pieces features crisp, white or cream-colored quartz veins cutting through the deep red jasper. For a professional-looking layout, arrange these rocks so the white veining lines run parallel or travel in the same general direction across the display. This uniform alignment mimics natural stone seams found in wild rock formations, giving your aquascape a cohesive and balanced feel.
• Pair Red Jasper with Dark Substrates to Maximize Color Contrast. To truly unlock the deep crimson beauty of Red Jasper, avoid pairing it with bright white or light yellow sand beds, which can wash out its visual impact. Instead, place these stones against dark substrates, such as deep black aquascaping soils, volcanic black sand, or rich brown planted-tank gravels. The dark foundation creates a dramatic contrast, making the fiery reds of the stone look incredibly vibrant and intense.
• Use the Liquid Superglue and Cotton Filter Method for Instant, Rock-Solid Bonds. Because Jasper features smooth crystalline fracture points, standard aquarium glues can sometimes slide during assembly. To form instant, permanent structural bonds when building high mountain ridges, push a small piece of loose cotton balls or cigarette filter material into the joint between two stones. Squeeze several drops of liquid cyanoacrylate superglue (aquarium-safe superglue) directly onto the cotton. The glue will trigger a rapid reaction with the fibers, hardening into an incredibly strong, rock-solid acrylic weld within seconds.