?unique=9ecd6e9)
Octo Regal 150S Air Venturi (VarioS 2S)
SKU: ROP-DC-VNTR-REGAL150SSS
- Genuine OEM Direct Replacement: Authentic factory-spec air and water mixing injection nozzle designed specifically for Regal 150 series protein skimmers powered by the VarioS-2S controllable DC pump.
- Calibrated Vacuum Venturi Throat: Features a precision-tapered internal constriction nozzle calculated to harness maximum vacuum pull for massive air induction rates.
- Integrated Ozone-Safe Air Barb: Outfitted with a molded rigid perimeter nipple that locks onto standard flexible air silencer lines and ozone distribution hosing.
- Streamlined Bubble Fractionating: Smooth internal geometry splits incoming fluid streams into tight clouds of microbubbles without restricting core pump volume.
- Saltwater-Inert Rigid Construction: Molded out of commercial-grade, impact-dense polymer blends that completely resist chemical breakdown or sludging.
- Toolless Push-Fit Configuration: Slides seamlessly into the native intake tracking of your pump volute faceplate, making seasonal maintenance completely effortless.
Reef Octopus
Globally trusted for premium protein skimmers and pumps, engineered in-house for unmatched reef filtration performance.
Reef Octopus Regal 150S Air Venturi (VarioS 2S Pump Platform)
The Reef Octopus Regal 150S Air Venturi is an authentic factory-spec replacement gas-induction nozzle distributed by CoralVue to restore and preserve the high-efficiency waste stripping dynamics of your protein skimmer. In a variable-speed DC skimmer loop, the VarioS-2S pump does not simply push water—it relies entirely on the negative vacuum pressure generated by this specialized venturi nozzle to pull air down from the silencer assembly. As water rushes through the restricted inner throat of the adapter, it accelerates exponentially, creating a low-pressure void that aggressively pulls in fresh air and directs it into the spinning needlewheel impeller to be chopped into organic-binding microbubbles.
Over years of nonstop operational cycles inside active sumps, this component is highly prone to calcification choke points. The continuous evaporation of water right at the raw air injection boundary causes calcium carbonate scale and salt creep to crust over the inner orifice line. If left unmanaged, or if the fragile plastic barb is accidentally snapped during a deep maintenance washout, your skimmer’s performance will tank. A compromised venturi bleeds critical air volume, resulting in a low, watery foam head, excessive microbubble spitting into your display tank, and an overall loss of chemical filtration capacity. Installing a fresh original factory nozzle immediately re-calibrates original internal tolerances, ensuring a tight seal for flawless waste collection.
Key Features
True Regal Series Optimization: Tailored specifically to sit cleanly against the tight spatial constraints and physical intake track footprints of the Regal 150 collection bodies.
Anti-Corrosive Polymer Durability: Built using heavy-wall injection-molded plastics that endure aggressive citric acid descaling baths and continuous exposure to pure ozone gas.
Airtight Internal Seal Mechanics: Machined slip collar lines seat snugly against the pump housing face, eliminating localized pressure loss or unsafe microbubble weeping.
Verified Model SKU Matrix
Because Reef Octopus configures the Regal 150 engine block in two distinctly different physical geometries, check your exact skimmer footprint before finalizing parts alignment:
Regal 150SSS (Space Saver Space-Saver Body): Uses the custom side-offset elbow venturi assembly (SKU: ROP-DC-VNTR-REGAL150SSS).
Regal 150INT (Traditional Out-Of-Body Volute Layout): Uses the classic straight-necked high-volume air-induction assembly (SKU: ROP-BB-VHY1000S).
What’s Included:
(1) Reef Octopus Replacement Regal 150S / VarioS-2S Thread-Free Polymer Air Venturi Nozzle
(Note: Flexible silicone air intake tubing, mechanical silencers, pinwheel rotors, and primary VarioS-2S pump blocks are sold separately).
Technical Specs:
Official Manufacturing Title: Reef Octopus VarioS-2S / Regal 150 Air Intake Venturi
SKU / Factory Part Identifiers: ROP-DC-VNTR-REGAL150SSS (Space Saver) | ROP-BB-VHY1000S (Traditional INT)
Material Matrix Composition: Saltwater-Safe High-Density Injection-Molded Matte Polymer
Connection Profile Type: Direct Volute Slip Nozzle with Friction-Fit Air Barb Terminal
Primary Function: Air/Water Volumetric Proportioning & Fluid Acceleration Failsafe
- Turn off your skimmer's pump controller and pull the main 24V power brick out of the wall to eliminate live electricity before servicing your gear.
- Disconnect your flexible silicone air intake line from the old venturi barb nipple, and slide the VarioS-2S pump completely clear of the skimmer body base track.
- Pull the old, calcified, or damaged venturi adapter straight out of the front intake neck of the pump volute cover. (If it is stuck due to salt buildup, twist gently as you pull).
- Take your new replacement venturi model, check that the slip nozzle faces are free of debris, and push it straight into the intake neck of the volute until it sits flush.
- Slide the pump back into the skimmer housing tracking, snap your flexible air line firmly onto the raised plastic barb nipple, and lower the unit into your sump.
- Plug your power converter back into the wall outlet, let the soft-start controller cycle complete, and check that a dense mist of bubbles instantly fills the reaction chamber.
Pro Tips:
- Clean the Air Injection Orifice with a Toothpick Monthly. Because this venturi operates right at the point where raw air meets high-velocity saltwater, it is the number one hotspot in your filtration loop for salt creep crust and hard calcium scaling. If you notice your skimmer foam dropping or the water line inside the body rising erratically, check this nozzle first. Use a wood toothpick or a small plastic brush to clear out the inner injection channel to restore full air volume without scratching the internal tracks.
- Never Use Drills or Metal Tools to Force Open a Clogged Intake. If your venturi nozzle becomes heavily clogged with rock-hard calcium scale, never use drill bits, steel drill strings, or sharp metal knives to gouge the blockage loose. This venturi depends on a highly sensitive, micro-engineered internal curvature to generate its vacuum draw. Scratching or widening the inner channel with metal tools will ruin the hydrodynamics of the plastic, permanently destroying its performance. Soak the part in a citric acid bath to dissolve blockages safely.
- Utilize Warm RO/DI Water Flushes to Melt Salt Creep Instantly. To extend the time between deep equipment cleanings, perform a quick venturi flush every two weeks. Disconnect the flexible air hose from your silencer canister and hold the open end of the tube up to a small cup filled with warm fresh RO/DI water while the skimmer pump is running. The VarioS-2S pump will draw the warm fresh water straight through the venturi barb, instantly dissolving soft salt creep rings before they can harden into a calcified restriction.