AutoAqua Inline Digital TDS Meters

Grouped product items
Product Name
Digital Inline TDS - Titanium One
SKU: CV-TDS100
$24.99
Digital Inline TDS - Titanium S1
SKU: CV-TDS100S
$24.99
Out of stock
Digital Inline TDS - Titanium S2
SKU: CV-TDS200S
$33.99
Out of stock
Digital Inline TDS - Titanium S3
SKU: CV-TDS300S
$44.99
Out of stock
Where to Buy

With a single push of a button, you’ll get an accurate reading of the TDS in your water!  The Titanium One TDS Meter is actually the smallest inline TDS meter available in the aquarium hobby. It uses a titanium probe, which provides excellent protection against corrosion, to measure the Total Dissolved Solids (TDS) in your water.

AutoAqua Titanium One Digital Inline TDS Meter TDS-100

Are you tired of big, boxy, hard-to-read TDS meters? So are we! That’s why we built the AutoAqua Titanium Series TDS meters. They are small, easy-to-use, and have a big bright screen to make checking your TDS fast and easy.

With a single push of a button, you’ll get an accurate reading of the TDS in your water!

The Titanium One TDS Meter is actually the smallest inline TDS meter available in the aquarium hobby. It uses a titanium probe, which provides excellent protection against corrosion, to measure the Total Dissolved Solids (TDS) in your water. 

The reason hobbyists measure TDS is to ensure the water produced by their reverse osmosis (RO) or reverse osmosis/deionization (RO/DI) system is safe to use in an aquarium. 

The Titanium One TDS monitor can be used to check the quality of your inlet or outlet water to help you determine when it’s time to replace the cartridges in your reverse osmosis system. This is the most common application for a TDS meter in our hobby and the Titanium One is ideal for the job with an accuracy of +/- 2%. 

It’s super easy to install, too. A ¼” push connect union tee is included to make setup a breeze. You can calibrate the Titanium One to ensure long-lasting accuracy. 

To conserve battery life, the unit will turn off automatically after 3 minutes of non-use. The battery is not proprietary, either. The Titanium One uses a common CR2032 lithium battery so when it comes time to change it, you should have no problem finding a replacement. Under normal use, the battery should last a year or more! There is also a low battery indicator on the display so you’ll never be left high and dry. 

 

MODEL: TDS-100

Check out these awesome features:

  • Simple installation with a ¼” push connect union tee included

  • High quality titanium probe

  • Small and compact design

  • Auto-off function

  • Can be calibrated

  • Low battery indicator

 

The Titanium One TDS-100 includes:

  • Digital Inline TDS - Titanium One x1

  • ¼” Push Connect Union Tee x1

 

Titanium One by the numbers:

  • Range : 0-999 ppm

  • Resolution : 1 ppm

  • Accuracy : +/- 2%

  • Power Source : CR2032 lithium battery x1

  • Battery Life : 1 year

 


 

AutoAqua Titanium S1 Digital Inline TDS Meter TDS-100S

 

Are you tired of big, boxy, hard-to-read TDS meters? So are we! That’s why we built the AutoAqua Titanium Series TDS meters. They are small, easy-to-use, and have a big bright screen to make checking your TDS fast and easy. 

 

The Titanium S1 also has a magnetically coupled controller to make it easy to pick up and stick back on the metal frame of your reverse osmosis system. There is no other TDS meter on the market like it!

 

The Titanium S1 features a single titanium probe, which provides excellent protection against corrosion, to measure the Total Dissolved Solids (TDS) in your water.

 

With a single push of a button, you’ll get an accurate reading of the TDS in your water! 

 

The reason hobbyists measure TDS is to ensure the water produced by their reverse osmosis (RO) or reverse osmosis/deionization (RO/DI) system is safe to use in an aquarium. 

 

The Titanium S1 TDS monitor can be used to check the quality of your inlet or outlet water to help you determine when it’s time to replace the cartridges in your reverse osmosis system. This is the most common application for a TDS meter in our hobby and the Titanium S1 is ideal for the job with an accuracy of +/- 2%. 

 

It’s super easy to install, too. A ¼” push connect union tee is included to make setup a breeze. You can calibrate the Titanium One to ensure long-lasting accuracy. 

 

To conserve battery life, the unit will turn off automatically after 3 minutes of non-use. The battery is not proprietary, either. The Titanium S1 uses a common CR2032 lithium battery so when it comes time to change it, you should have no problem finding a replacement. Under normal use, the battery should last a year or more! There is also a low battery indicator on the display so you’ll never be left high and dry. 

 

MODEL: TDS-100S

Check out these awesome features:

  • Simple installation with a ¼” push connect union tee included

  • High quality titanium probe

  • Small and compact design

  • Auto-off function

  • Can be calibrated

  • Magnetic mount

  • Low battery indicator

 

The Titanium S1 TDS-100S includes:

  • Digital Inline TDS - Titanium S1 x1

  • ¼” Push Connect Union Tee x1

 

Titanium S1 by the numbers:

  • Range : 0-999 ppm

  • Resolution : 1 ppm

  • Accuracy : +/- 2%

  • Power Source : CR2032 Lithium Battery x1

  • Battery Life : 1 year

 


 

AutoAqua Titanium S2 Digital Inline TDS Meter TDS-200S

 

Are you tired of big, boxy, hard-to-read TDS meters? So are we! That’s why we built the AutoAqua Titanium Series TDS meters. They are small, easy-to-use, and have a big bright screen to make checking your TDS fast and easy. 

The Titanium S2 also has a magnetically coupled controller to make it easy to pick up and stick back on the metal frame of your reverse osmosis system. There is no other TDS meter on the market like it!

The Titanium S2 features two titanium probes, which provides excellent protection against corrosion, to measure the Total Dissolved Solids (TDS) in your water.

With a single push of a button, you’ll get an accurate reading of the TDS in your water! Push the button a second time to check TDS using the second probe. It’s so easy!

The reason hobbyists measure TDS is to ensure the water produced by their reverse osmosis (RO) or reverse osmosis/deionization (RO/DI) system is safe to use in an aquarium. 

The Titanium S2 TDS monitor can be used to check the quality of your inlet and outlet water to help you determine when it’s time to replace the cartridges in your reverse osmosis system. This is the most common application for a TDS meter in our hobby and the Titanium S2 is ideal for the job with an accuracy of +/- 2%. You’ll know precisely when to replace your carbon block, DI resin, or TFC membrane to ensure your aquarium water is pure and so you aren’t throwing away good cartridges prematurely.

It’s super easy to install, too. A ¼” push connect union tee is included to make setup a breeze. You can calibrate the Titanium One to ensure long-lasting accuracy. 

To conserve battery life, the unit will turn off automatically after 3 minutes of non-use. The battery is not proprietary, either. The Titanium S2 uses a common CR2032 lithium battery so when it comes time to change it, you should have no problem finding a replacement. Under normal use, the battery should last a year or more! There is also a low battery indicator on the display so you’ll never be left high and dry. 

 

MODEL: TDS-200S

Check out these awesome features:

  • Simple installation with a ¼” push connect union tee included

  • High quality titanium probe

  • Small and compact design

  • Auto-off function

  • Can be calibrated

  • Magnetic mount

  • Low battery indicator

 

The Titanium S2 TDS-200S includes:

  • Digital Inline TDS - Titanium S2 x1

  • ¼” Push Connect Union Tee x2

 

Titanium S2 by the numbers:

  • Range : 0-999 ppm

  • Resolution : 1 ppm

  • Accuracy : +/- 2%

  • Power Source : CR2032 Lithium Battery x1

  • Battery Life : 1 year

 


AutoAqua Titanium S3 Digital Inline TDS Meter TDS-300S

Are you tired of big, boxy, hard-to-read TDS meters? So are we! That’s why we built the AutoAqua Titanium Series TDS meters. They are small, easy-to-use, and have a big bright screen to make checking your TDS fast and easy. 

The Titanium S3 also has a magnetically coupled controller to make it easy to pick up and stick back on the metal frame of your reverse osmosis system. There is no other TDS meter on the market like it!

The Titanium S3 features three titanium probes, which provides excellent protection against corrosion, to measure the Total Dissolved Solids (TDS) in your water. You can put one probe after your source water, another after your TFC membrane, and the third after the DI catridge. 

With a single push of a button, you’ll get an accurate reading of the TDS in your water! Push the button a second time to check TDS using the second probe. Push it again to check with the third probe. It’s so easy!

The reason hobbyists measure TDS is to ensure the water produced by their reverse osmosis (RO) or reverse osmosis/deionization (RO/DI) system is safe to use in an aquarium. 

The Titanium S3 TDS monitor can be used to check the quality of your inlet and outlet water to help you determine when it’s time to replace the cartridges in your reverse osmosis system. This is the most common application for a TDS meter in our hobby and the Titanium S3 is ideal for the job with an accuracy of +/- 2%. You’ll know precisely when to replace your carbon block, DI resin, or TFC membrane to ensure your aquarium water is pure and so you aren’t throwing away good cartridges prematurely.

It’s super easy to install, too. A ¼” push connect union tee is included to make setup a breeze. You can calibrate the Titanium One to ensure long-lasting accuracy. 

To conserve battery life, the unit will turn off automatically after 3 minutes of non-use. The battery is not proprietary, either. The Titanium S3 uses a common CR2032 lithium battery so when it comes time to change it, you should have no problem finding a replacement. Under normal use, the battery should last a year or more! There is also a low battery indicator on the display so you’ll never be left high and dry. 

 

MODEL: TDS-300S

Check out these awesome features:

  • Simple installation with a ¼” push connect union tee included

  • High quality titanium probe

  • Small and compact design

  • Auto-off function

  • Can be calibrated

  • Magnetic mount

  • Low battery indicator

 

The Titanium S3 TDS-300S includes:

  • Digital Inline TDS - Titanium S3 x1

  • ¼” Push Connect Union Tee x3

 

Titanium S3 by the numbers:

  • Range : 0-999 ppm

  • Resolution : 1 ppm

  • Accuracy : +/- 2%

  • Power Source : CR2032 Lithium Battery x1

  • Battery Life : 1 year

Write Your Own Review
You're reviewing:AutoAqua Inline Digital TDS Meters
Your Rating